marantz PM-66SE

kinvig · 22nd March 2008, 10:44 AM

Hi everyone. The fuse on my Marantz amplifier has blown and it seems to be a discontinued type, at least according to Maplins. It is a 'T16 5AL' 250V. Does anyone know of a suitable alternative fuse I could buy?

Many thanks!

kinvig
london

isabolovic · 2nd April 2008, 07:02 PM

Hi,

It seems to me that is T 1.65A ~250V fuse. You can replace it with T 1.6A ~250V (slow blow) fuse. Check dimensions first, it can be 6.3x32mm (more likely) or 5x20mm.

Regards,
Ivan

jaycee · 2nd April 2008, 11:46 PM

How did the fuse blow? Did the wire inside it just snap cleanly, or was the inside of the glass blackened? If it's the latter, dont just put in another fuse!

22nd March 2008, 10:44 AM	#1
kinvig diyAudio Member Join Date: Mar 2008	marantz PM-66SE Hi everyone. The fuse on my Marantz amplifier has blown and it seems to be a discontinued type, at least according to Maplins. It is a 'T16 5AL' 250V. Does anyone know of a suitable alternative fuse I could buy? Many thanks! kinvig london

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with Marantz PM-66SE amplifier	channel3	Solid State	4	5th January 2008 07:29 PM
Marantz PM-66SE Repair Thread	poynton	Solid State	0	29th December 2007 07:35 PM
Marantz PM-66SE: No audio	jaosnlel	Solid State	2	19th October 2007 02:04 PM
Marantz PM-66SE Blown Channel	Chudley	Solid State	2	8th May 2007 07:28 PM
Marantz Pm-66SE	geddam	Solid State	2	28th April 2005 02:15 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd April 2008, 07:02 PM	#2
isabolovic diyAudio Member Join Date: Apr 2007	Hi, It seems to me that is T 1.65A ~250V fuse. You can replace it with T 1.6A ~250V (slow blow) fuse. Check dimensions first, it can be 6.3x32mm (more likely) or 5x20mm. Regards, Ivan

2nd April 2008, 11:46 PM	#3
jaycee diyAudio Member Join Date: Apr 2004 Location: Norwich, UK	How did the fuse blow? Did the wire inside it just snap cleanly, or was the inside of the glass blackened? If it's the latter, dont just put in another fuse!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)