JLH Quad esl's amplifier version - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 16th November 2001, 05:55 PM   #1
diyAudio Member
 
Join Date: Nov 2001
Location: Montreal Quebec


Hi ,

I am looking to build this modified version of JLH ss class A amplifier . I am tinking about assembling it on a perforated board ,has anyone made amplifier on perforated board ? Any downside to it in term of performance ? I would prefer to avoid dealing with the capacitive problem involved with pcb tracks and components placements . If someone has made a pcb for that amp, that works , I am willing to offer retribution for a layout . I will most certainly seek for more info or comments on this design.

thanks in advance.
__________________
Michel
  Reply With Quote
Old 16th November 2001, 06:53 PM   #2
Geoff is offline Geoff  United Kingdom
diyAudio Member
 
Join Date: Apr 2001
Location: UK
Michel

I assume that you are referring to the recent addition to my website. For those who have not seen the new page, it can be found at http://www.gmweb.btinternet.co.uk/index.htm

I can probably obtain a copy of the pcb design that was used for the original amps, but if you wish to use perf. board then there should be no problems. I have used veroboard for all my JLH amp construction and have not yet had any difficulties, though I use the copper strip solely for fixing the components and run separate solid copper wires for current carrying purposes.

Lay out the components on the perf. board in the same sort of order as the schematic, keeping the input and output at separate ends of the board - a couple of inches (50mm) or so apart is sufficient. Connect the power supply leads and the decoupling capacitors close to the output transistor connections. Provide a separate earth return for the clean (signal) earths and the dirty (eg decoupling capacitor) earths.

Let me know if I can help further.

Geoff
  Reply With Quote
Old 16th November 2001, 09:00 PM   #3
Nisbeth is offline Nisbeth  Denmark
diyAudio Member
 
Nisbeth's Avatar
 
Join Date: Jan 2001
Location: Denmark
Geoff, if you have access to a PCB layout for the JLH design I'd be very interested in getting it. Perhaps you could post it on your site?

/Uffe
  Reply With Quote
Old 16th November 2001, 10:57 PM   #4
Geoff is offline Geoff  United Kingdom
diyAudio Member
 
Join Date: Apr 2001
Location: UK
I have just received the pcb layout that Nick used for the original JLH ESL amp and power supply. I will try to get it added to my webpage over the weekend.

Geoff
  Reply With Quote
Old 16th November 2001, 11:56 PM   #5
diyAudio Member
 
Join Date: Nov 2000
Yes, like Geoff reports, veroboard is fine to build your JLH. Did one off these JLH's almost two years ago with this board. I use this for all my amplifier projects. Just finished an ALEPH3 same way. I use 1 millimeter silvered copper wire to realize the traces. This is the same wire used to make small HF coils and it works like a charm. For traces that carry high currents you can use two parallel runs.

Cheers
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Genelex Gold Lion KT88s (reissue version) (matched quad, lightly used) n_maher Swap Meet 8 10th September 2008 06:01 PM
my new amplifier (beta version) ionomolo Chip Amps 51 9th January 2008 04:53 AM
hk citation twelve stock or mosfet version to drive original quad esl's ? vaslejean Solid State 2 11th March 2007 11:15 PM


New To Site? Need Help?

All times are GMT. The time now is 10:41 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2