Go Back   Home > Forums > Amplifiers > Solid State
Home Forums Rules Articles Store Gallery Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 30th January 2008, 10:57 PM   #1
Hedley is offline Hedley  United Kingdom
diyAudio Member
 
Join Date: Jan 2008
Default Cyrus Two - Faulty Speaker Channel

Hi guys - 1st time poster here....

I recently dug out some old Mission speakers from my garage, dusted them off and picked up a Cyrus two amp on eBay.

However, when the amp arrived it was clear the Royal Mail had bounced it up north as the on/off switch was hanging off. I managed to fix it up with a bit of superglue and eventually fired it up - only to discover that the left speaker channel isn't working properly!

I've checked the obvious (used other inputs/speakers etc) and taken the case off to see if anything has blown. I can't see any internal damage - not that I'm very technically minded but I have checked a number of other threads on this forum and seen some pictures etc of blown amps.

The left speaker channel emits music at a very low level independant of the volume setting and the balance control has no impact at all. I'm presuming that the 'impact' damage caused in the mail may have caused more serious issues than I initially thought!

Anyone any ideas of anything else I can check / anything I've missed?

Any help much appreciated...

Hedley
  Reply With Quote

Reply


Hide this!Advertise here!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
denom pma250 amp faulty,but no faulty parts found please help homertooties Solid State 1 7th December 2008 03:58 PM
Cyrus 2 power switch and R channel down voltrax Solid State 3 19th June 2008 01:55 PM
Mission cyrus 2 l/h channel low volume Durro1 Solid State 4 10th March 2008 02:48 AM
Cyrus Pre, faulty or normal? AndrewT Solid State 4 15th April 2007 09:29 AM
Help needed with faulty speaker! harrygrey382 Full Range 6 13th July 2006 08:13 AM


New To Site? Need Help?

All times are GMT. The time now is 09:56 AM.

Page generated in 0.06471 seconds (66.66% PHP - 33.34% MySQL) with 10 queries

Copyright ©1999-2012 diyAudio