sony TA-1010 volume issue

pezza89 · 27th January 2008, 01:38 AM

hi all, i got a sony ta-1010 today from a garage sale, its in great condition however no volume occurs until about the half way point (i would expect more volume at this point too) and anymore the sound becomes a little distorted. Any ideas what could be causing this? both channels seem to be equal and all pots were cleaned and checked. Appreciate any help!! Thanks! Andy

latala · 27th January 2008, 05:17 PM

I dont Know this mdel but check that the tape monitor is off! Also check that there is no pre-power amp links missing
other than that Have you tried all inputs
regards Trevor

pezza89 · 28th January 2008, 05:43 AM

hi there, tape monitor is definately off and it doesnt have any preamp links on the rear - volume only appears to work at the halfway point and beyond using the AUX function - i'll try tape and phono tonite to see if its occuring in those inputs also and give an update! Cheers!

27th January 2008, 01:38 AM	#1
pezza89 diyAudio Member Join Date: Sep 2007	sony TA-1010 volume issue hi all, i got a sony ta-1010 today from a garage sale, its in great condition however no volume occurs until about the half way point (i would expect more volume at this point too) and anymore the sound becomes a little distorted. Any ideas what could be causing this? both channels seem to be equal and all pots were cleaned and checked. Appreciate any help!! Thanks! Andy

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yamaha RX-V1 Volume Control Issue	tone2222	Solid State	2	24th August 2010 08:22 PM
Filmosound L-1 6V6 Volume pot issue	atmars	Tubes / Valves	1	5th September 2008 03:21 PM
sony DAV c700 DVD player issue	buytamil	Solid State	1	19th November 2007 06:20 PM
Sony ta-4650 Vfet .. Volume Problem. Need Help	tater8	Solid State	4	27th July 2005 03:19 PM
Rotel RB-1010	anatech	Solid State	0	1st October 2004 09:24 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th January 2008, 05:17 PM	#2
latala diyAudio Member Join Date: Feb 2006 Location: staffordshire	I dont Know this mdel but check that the tape monitor is off! Also check that there is no pre-power amp links missing other than that Have you tried all inputs regards Trevor

28th January 2008, 05:43 AM	#3
pezza89 diyAudio Member Join Date: Sep 2007	hi there, tape monitor is definately off and it doesnt have any preamp links on the rear - volume only appears to work at the halfway point and beyond using the AUX function - i'll try tape and phono tonite to see if its occuring in those inputs also and give an update! Cheers!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)