I realy dont have any knowledge in power supply. I want to feed a 12 VDC amplifier (4x100 watts - 4 ohms) with this Omron power supply. The dealer suggested me to buy the 600 watts - 50 amp.
Can you help me to make an intelligent choice.
Thank you.
Omron S8VM 60012C - Price= $325 CAN
Data sheet
http://www.ia.omron.com/data_pdf/data_sheet/s8vm_dsheet_csm140.pdf
Power rating 600 W
Input Voltage
100 to 240 VAC
Frequency
50/60 Hz
Current 100-V input
8.0 A max. (5 V)
8.3 A max. (12 V, 15 V, and 24 V)
Current 200-V input 4
.0 A max. (5 V)
4.2 A max. (12 V, 15 V, and 24 V)
Power factor
100-V input = 0.98 min.
200-V input = 0.93 min.
Leakage
100-V input 0.4 mA
200-V input 0.75 mA max.
Inrush current
100-V input 20 A max.
200-V input 40 A max.
Output Voltage adjustment range
-20% to 20% (with V. ADJ)
Ripple 3.8% (p-p) max. (5 V), 2.0% (p-p) max. (12 V), 2.0% (p-p) max. (15 V), 1.25% (p-p) max. (24 V), (at rated input/output voltage)
Input variation influence 0.4% max. (at 85 to 264 VAC input, 100%)
Load variation influence
(rated input voltage) 0.6% max. (with rated input, 0 to 100% load)
Temperature variation
influence 0.02%/°C max.
Startup time
1,000 ms max. (at rated input/output voltage)
Hold time
20 ms typ. (15 ms min.) (at rated input/output voltage)
Additional functions
Overload protection
Overvoltage protection
Overheat protection
Power failure alarm indication
Power failure alarm output
Series operation
Parallel operation
Remote sensing function
Remote control function
Storage temperature -25 to 65°C
Ambient operating
humidity 30% to 85% (Storage humidity: 25% to 90%)
Can you help me to make an intelligent choice.
Thank you.
Omron S8VM 60012C - Price= $325 CAN
Data sheet
http://www.ia.omron.com/data_pdf/data_sheet/s8vm_dsheet_csm140.pdf
Power rating 600 W
Input Voltage
100 to 240 VAC
Frequency
50/60 Hz
Current 100-V input
8.0 A max. (5 V)
8.3 A max. (12 V, 15 V, and 24 V)
Current 200-V input 4
.0 A max. (5 V)
4.2 A max. (12 V, 15 V, and 24 V)
Power factor
100-V input = 0.98 min.
200-V input = 0.93 min.
Leakage
100-V input 0.4 mA
200-V input 0.75 mA max.
Inrush current
100-V input 20 A max.
200-V input 40 A max.
Output Voltage adjustment range
-20% to 20% (with V. ADJ)
Ripple 3.8% (p-p) max. (5 V), 2.0% (p-p) max. (12 V), 2.0% (p-p) max. (15 V), 1.25% (p-p) max. (24 V), (at rated input/output voltage)
Input variation influence 0.4% max. (at 85 to 264 VAC input, 100%)
Load variation influence
(rated input voltage) 0.6% max. (with rated input, 0 to 100% load)
Temperature variation
influence 0.02%/°C max.
Startup time
1,000 ms max. (at rated input/output voltage)
Hold time
20 ms typ. (15 ms min.) (at rated input/output voltage)
Additional functions
Overload protection
Overvoltage protection
Overheat protection
Power failure alarm indication
Power failure alarm output
Series operation
Parallel operation
Remote sensing function
Remote control function
Storage temperature -25 to 65°C
Ambient operating
humidity 30% to 85% (Storage humidity: 25% to 90%)
I'm a car audio fan and since I come on this forum I plan to install a setup in my living room.
I already have the enclosures for witch I have posted a thread.
http://www.diyaudio.com/forums/showthread.php?s=&threadid=114851
I need advise for the speakers choice.
My amplifier is an Orion 8004 and the head unit an Eclipse CD7000.
To power this setup I need a power supply. But as I said I dont have any knowledge about PS and I need help. I found this one (Omron) and I want to know if it is appropriate.
I already have the enclosures for witch I have posted a thread.
http://www.diyaudio.com/forums/showthread.php?s=&threadid=114851
I need advise for the speakers choice.
My amplifier is an Orion 8004 and the head unit an Eclipse CD7000.
To power this setup I need a power supply. But as I said I dont have any knowledge about PS and I need help. I found this one (Omron) and I want to know if it is appropriate.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.