carver m200t

classic tunage · 4th December 2007, 08:14 AM

i have a carver m200t amp that i would like to convert from spring clip out-puts to binding posts. any idea how hard this would actually be? i know i can get binding posts off of e-bay, but i haven't yet opened the amp to see if/how it could be done. any suggestions?? would i be better off having an external binding post connection with a short jumper so that i can also bi-wire my speakers?

Workhorse · 4th December 2007, 12:39 PM

ping: Carver specialist Anatech

Bigred · 5th December 2007, 05:43 AM

classic tunage..... whereabouts outside TO are you? If your close maybe we could get together and I can give you some ideas. I have done a couple M-200t's and many older pieces like Marantz with the push button terminals. My way is work because I like to have it look like factory when done and also I don't modify anything when possible so it can be returned to stock with the original terminals if needed. The 200 has that cheap push tab terminal block so I just built a custom block that mounted in its place and used the exsisting holes.

classic tunage · 12th December 2007, 04:13 AM

i'm in brampton.

4th December 2007, 08:14 AM	#1
classic tunage diyAudio Member Join Date: Dec 2007	carver m200t i have a carver m200t amp that i would like to convert from spring clip out-puts to binding posts. any idea how hard this would actually be? i know i can get binding posts off of e-bay, but i haven't yet opened the amp to see if/how it could be done. any suggestions?? would i be better off having an external binding post connection with a short jumper so that i can also bi-wire my speakers?

4th December 2007, 12:39 PM	#2
Workhorse diyAudio Member Join Date: Dec 2004 Location: n/a	ping: Carver specialist Anatech __________________ The power fanatic

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carver amp, needs doc	Courtec	Solid State	25	5th June 2009 04:31 AM
Carver TFM-15 - Need Help!	crazygreek	Solid State	7	18th August 2007 05:41 AM
Need Help w/ Carver Sub Amp	Rte 66 Dave	Solid State	0	18th July 2007 05:51 AM
Upgrading a Carver M200t/M400t	Bill Ayotte	Solid State	0	29th March 2007 07:46 AM
Looking for Carver C-19 SM	dudu	Solid State	0	11th September 2006 11:48 AM

New To Site?	Need Help?
Register to Participate Search Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


<a rel='nofollow' href='http://www.diyaudio.com/openx/www/delivery/ck.php?n=aa5cb2e9&cb=944491' target='_blank'><img src='http://www.diyaudio.com/openx/www/delivery/avw.php?zoneid=3&cb=944491&n=aa5cb2e9' border='0' alt='' /></a>	We're saving for a new server - help us to serve you by Donating Today and become a friend with benefits! Ads on/off / Custom Title / 2009 Tshirt / More PMs / Bigger Images / Advanced printing

5th December 2007, 05:43 AM	#3
Bigred diyAudio Member Join Date: Jul 2007	classic tunage..... whereabouts outside TO are you? If your close maybe we could get together and I can give you some ideas. I have done a couple M-200t's and many older pieces like Marantz with the push button terminals. My way is work because I like to have it look like factory when done and also I don't modify anything when possible so it can be returned to stock with the original terminals if needed. The 200 has that cheap push tab terminal block so I just built a custom block that mounted in its place and used the exsisting holes.

12th December 2007, 04:13 AM	#4
classic tunage diyAudio Member Join Date: Dec 2007	i'm in brampton.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)