This is from Onkyo's web site
2 x 125 watts/channel into 6 ohm
Dynamic Power**
2 ohms
6 ohms
8 ohms 2 x 140 W at 8 ohms
THD 0.08 % at rated power
IM Distortion Rated Power 0.08 % at rated power
Damping Factor 100 at 8 ohms
Frequency Response 10 Hz to 100 kHz: ±1 dB
Signal-to-Noise Ratio 110 dB (IHF A, 0.5 V input)
Dimensions (W x H x D)
Inches 17-1/8" x 5-11/16" x 12-7/16"
Weight 18.7 lbs
* specifications subject to change without notice
** calculated on basis of IHF Dynamic headroom
2 x 125 watts/channel into 6 ohm
Dynamic Power**
2 ohms
6 ohms
8 ohms 2 x 140 W at 8 ohms
THD 0.08 % at rated power
IM Distortion Rated Power 0.08 % at rated power
Damping Factor 100 at 8 ohms
Frequency Response 10 Hz to 100 kHz: ±1 dB
Signal-to-Noise Ratio 110 dB (IHF A, 0.5 V input)
Dimensions (W x H x D)
Inches 17-1/8" x 5-11/16" x 12-7/16"
Weight 18.7 lbs
* specifications subject to change without notice
** calculated on basis of IHF Dynamic headroom
Hi, I saw those specs where there's no entry for 4 ohms and 2 ohms is blank. The amp is rated for 100/ch into 8 and 125/ch into 6 ohms.
Visited the site again, saw the owner's manual this time and is states outright not for use with 4 ohm loads. That is what I was looking for.
Pete B.
Visited the site again, saw the owner's manual this time and is states outright not for use with 4 ohm loads. That is what I was looking for.
Pete B.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.