Old Crown MA10,000 with facelift. Not very much power by today's standards.
Will swing in excess of 200VRMS (10KW) mono into 2 ohms:
http://www.crestaudio.com/media/pdf/10001_10-15-97.pdf
Of course, if you need 18KW into 4 ohms in one rack space:
http://pro-audio.powersoft.it/download_get.php?obj=600
(will burn up any single speaker I am aware of)
Will swing in excess of 200VRMS (10KW) mono into 2 ohms:
http://www.crestaudio.com/media/pdf/10001_10-15-97.pdf
Of course, if you need 18KW into 4 ohms in one rack space:
http://pro-audio.powersoft.it/download_get.php?obj=600
(will burn up any single speaker I am aware of)
G.Kleinschmidt said:"Fast
40V / millisecond slew rate"
Huh?
That's what I thought and then noticed that they go on to say
" 41 volts per microsecond " in the spec. document:
http://www.aetechron.com/7796specsheet.pdf
djk said:Of course, if you need 18KW into 4 ohms in one rack space:
http://pro-audio.powersoft.it/download_get.php?obj=600
(will burn up any single speaker I am aware of)
And they will. We have one of these sitting on the shelf. No one will use it! After Fifty Cent blew up 4 EV X Subs with it.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- This looks like a fairly impressive amp...