diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   DH101 troubleshooting (http://www.diyaudio.com/forums/solid-state/107596-dh101-troubleshooting.html)

Stormrider 27th August 2007 09:31 PM

DH101 troubleshooting
 
Hello everyone.

I recieved a Hafler DH101 pre in semi-working condition . It has a high noise floor (no hum, just noise) and sound does make it through the pre, but it is not fullrange and the vol control has to be turned fully clockwise to get anything.

I have the service manuel.

Now, i have +/- 18v from the power supply, so thats working. I checked to see if any of the tantalum caps had shorted and they okay. Should i go ahead and replace the tantalums and electrolytics in the circuit? With no voltage chart i'm at a loss at where to go from here.

Any suggestions? Thanks.

Leolabs 28th August 2007 02:29 AM

What kind of noise??Hiss??

Stormrider 28th August 2007 03:02 AM

White noise.


All times are GMT. The time now is 12:06 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2