diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   McIntosh Power Amplifier Power Guard (http://www.diyaudio.com/forums/solid-state/107022-mcintosh-power-amplifier-power-guard.html)

johnnyrt 17th August 2007 06:51 AM

McIntosh Power Amplifier Power Guard
 
The right channel limit light stays on constantly on my McIntosh power amplifier MC2500. This does not seem to affect its operation. I found an old discussion on this forum about the problem but there were no replys and the last entry was dated December 2005. Is anyone out there familiar with the Power Guard Limit light always on problem?

djk 17th August 2007 09:38 AM

Get the schematic from McIntosh, have your serial number handy when you call.

Replace the lamp driver transistor.

johnnyrt 23rd August 2007 10:22 PM

Thanks. I already have the schematics. I will replace the part then post the result on this thread.
johnnyrt


All times are GMT. The time now is 02:09 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2