diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Luxman LV-102 (http://www.diyaudio.com/forums/solid-state/106555-luxman-lv-102-a.html)

hifi-valter 8th August 2007 02:21 PM

Luxman LV-102
 
Hello to everybody. I am quite new to this forum but I already read many many threads. I recently bought an old Luxman LV-102 with one channel dead: output devices (BJT) to be substituted, driver (MOSFET) as well. I also suspect there is an additional problem in the previous stage (which is located on separated PCB's, one per channel): for this purpose I bought also the service manual but the version I received is labelled as "temporary": on this version the electrical diagram of the last circuits is a little bit different from that in my amplifier.
I would kindly ask you to help me before to buy, or at least to try, a different, or updated, manual on the net. Thanks in advance.

Valter


All times are GMT. The time now is 06:58 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2