Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Upgrading a Yamaha M-70 power amp?
Upgrading a Yamaha M-70 power amp?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 6th August 2007, 07:41 AM   #1
Brisso57 is offline Brisso57  Australia
diyAudio Member
Brisso57's Avatar
Join Date: Sep 2005
Location: the leafy west of Brisbane
Default Upgrading a Yamaha M-70 power amp?

Has anyone upgraded or modernised their Yamaha (class A) M-70 power amp?

If so, what did you do that produced audible or measurable benefits?


A speaker-builder's parable: "That burned down, fell over, then sank into the swamp. But the fourth one stayed up. And that's what you're going to get, Lad, the strongest castle of all."
  Reply With Quote
Old 18th October 2007, 07:35 PM   #2
Blkorpheus is offline Blkorpheus  United States
diyAudio Member
Join Date: Oct 2007
Default M-70

I've done several upgrades and mod to this unit.
  • I've bypass the old level control and solder pure silver wire from the rca inputs to the input board.

    Replaced stock fuses with silver -plated types.

    Replaced standard power cord with an silver plated IEC power inlet.

    Added Bybees to the input board.
None of these alter the timbre of unit but between the level control bypass and the bybees, more microdynamics came out and more headroom which still rivals my Adcom 555 IIs at the moment. It's an easy to mod unit but it gets hard to handle when you start modding the power and gets easily stuck in protection mode.
  Reply With Quote
Old 19th October 2007, 04:09 PM   #3
gni is offline gni  United States
diyAudio Member
gni's Avatar
Join Date: Sep 2006
Service Manuals:

Links to similar discussions:

Recently toasted my M-45 (cousin to the M-70) while adjusting
the bias (top mounted jumpers carry voltage rails). I am in the
final stages of installing a new amp module in the shell of the old

The darn protection circuit. . .very picky. The M-70 is technically more
advanced than the M-45 though.
  Reply With Quote
Old 29th September 2008, 06:08 AM   #4
dgm is offline dgm  Australia
diyAudio Member
Join Date: May 2006
Default M-70 protection problem

There are lots of comments about M-70 protection problems. My amp has this problem - will not switch on. It was a gradual thing as it took longer and longer to start up.
Does anyone know how to fix this - whats the usual problem?
  Reply With Quote


Upgrading a Yamaha M-70 power amp?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mod - Upgrading opamps in a yamaha av receiver dsiroky Solid State 30 20th August 2017 03:13 PM
Need some advice rebuilding/upgrading 2 power amps. SuperKris Solid State 31 26th May 2009 05:24 AM
YAMAHA M-60 Power Amp jeffshort2000 Swap Meet 8 5th December 2007 12:03 PM
Upgrading Power Supply in QUAD 606 Mk2 arupg Solid State 0 17th March 2007 06:56 AM
Upgrading Transistors for Low Power Amp PTL60 Solid State 12 7th February 2002 01:15 AM

New To Site? Need Help?

All times are GMT. The time now is 07:42 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio