My Last Smps Project - Page 3 - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 11th August 2007, 08:38 PM   #21
diyAudio Member
 
Pjotr's Avatar
 
Join Date: Nov 2002
Location: Netherlands
Quote:
Originally posted by Eva
Your layout does not show any safety spacing (5mm recommended) between mains live side and output side.

Quote:
Originally posted by streetera
Needs at least 8 mm creepage and clearance between input and output (including across opto / isolation barrier and any swtiching XFR)
Nice the pros put up some numbers on safety distance. But the CE regulations demand at least 6 mm creepage and clearance distance for class II and 0.4 mm isolation thickness minimum anyway between the mains parts and touchable LV parts.

Even it is DIY and for you own use (and risk), it is wise to comply with this distances for your own and others safety.

Cheers
  Reply With Quote
Old 13th August 2007, 02:39 AM   #22
jaya000 is offline jaya000  India
diyAudio Member
 
Join Date: Dec 2006
Now waiting 4 schematics & pcb layout.
How about power amp project development?
  Reply With Quote
Old 13th August 2007, 03:52 AM   #23
mzzj is offline mzzj  Finland
diyAudio Member
 
Join Date: Jul 2005
Location: 65N 25E
Quote:
Originally posted by Pjotr



The CE regulations demand at least 6 mm creepage and clearance distance for class II and 0.4 mm isolation thickness minimum

Is cotton tape approved?
  Reply With Quote
Old 13th August 2007, 03:23 PM   #24
diyAudio Member
 
CHACALPOWERS's Avatar
 
Join Date: Jul 2007
Default cottom

Dears

No fire, no lightning.
Yes, All aproved cottom.
I think there is more fire in the post.
I don´t like some posts. The best will be I will go out/away DIYAUDIO.COM.



.
  Reply With Quote
Old 14th August 2007, 01:49 AM   #25
diyAudio Member
 
sivan_and's Avatar
 
Join Date: Dec 2004
Location: B'lore/ Calicut India
Send a message via Yahoo to sivan_and
:
__________________
SivanandBalan
  Reply With Quote
Old 20th August 2007, 09:19 PM   #26
diyAudio Member
 
Join Date: Sep 2006
Some people dont see DIY electical safety as an aspect of good design. Im different to these, I do. of course I cant make anyone do anything over such a medium as this but I can just ask politely that they inform others of any safety short comings where there are KNOWN to exist. regards A Streeter
  Reply With Quote
Old 21st August 2007, 02:33 PM   #27
diyAudio Member
 
CHACALPOWERS's Avatar
 
Join Date: Jul 2007
Default about pcb design

In my smps the voltage is 342VDC input (127VAC with doubler) and the output is around (regulation less) +83/-83VDC and there´s not danger enter primary and secondary tensions. I never have problems with safety clearance because 3mm is very good distance. Remember 1mm/air isolation = 1000VDC , ok?

Bye for all
  Reply With Quote
Old 22nd August 2007, 10:26 AM   #28
diyAudio Member
 
megajocke's Avatar
 
Join Date: Jan 2003
Then there is moisture, contamination, spikes etc. It is 8mm/6mm for a reason.
  Reply With Quote
Old 31st August 2007, 08:37 AM   #29
diyAudio Member
 
Join Date: Mar 2007
Thumbs up nice work

hi,
Nice work CHACALPOWERS . I was wondering if you could post the schematic of the SMPS. I am also building an smps with sg3525 controller.but mine is 12v to +/-50v 400W.Planning to build a sub woofer amp for car with it.
thanks
  Reply With Quote
Old 1st September 2007, 10:35 PM   #30
aandy is offline aandy  United Kingdom
diyAudio Member
 
Join Date: Mar 2007
Location: in UK unfortunatly
regs are real but thouse of us that do this for a living had to start.

my bigest smps does 12kw and semikron tell me that's small.
mains rectified will all ways give a new man a lesson!
and it hearts!

nice to see a toriodal smps tx also i did one and the big boy told me it would not work,it did
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
SMPS Elliott Project 89--Winding Xformers ghettorigged Parts 8 15th November 2013 06:04 PM
project smps for car acruwer Car Audio 37 5th September 2009 03:13 PM
Learning Project - Buck SMPS Joral Power Supplies 10 9th June 2009 08:08 PM
my smps project help zerohead_ak47 Power Supplies 51 22nd January 2009 08:57 PM
project smps for car acruwer Power Supplies 1 27th March 2006 04:10 PM


New To Site? Need Help?

All times are GMT. The time now is 07:05 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2