diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   arcam advice (http://www.diyaudio.com/forums/solid-state/105455-arcam-advice.html)

Smokeyone 18th July 2007 12:16 PM

arcam advice
 
Hello
I am in progress in building a jordan jx923 into a 48" high
TRIANGULAR CROSS-SECTION enclosure.

I am tempted to purchase an arcam amp off ebay, maybe the A80 !
I already have a pioneer precision cd player. Has anyone any opions on this setup. Could I do better than the Arcam but will be holding onto the pioneer.
Thanks for any advice

AndrewT 18th July 2007 12:32 PM

Hi,
if the A80 relatively cheap then go ahead and bid for it.

Then you will have a reference to compare to when you start building your own amplifiers.

Smokeyone 18th July 2007 02:16 PM

Thanks for the reply.
I take it you would build your own!
Can you suggest a project amp........
Should have inputs for turntable, cassette deck & cd player........

Cheers

AndrewT 18th July 2007 02:36 PM

I would have started with just a power amp.
Have a look at the ESP projects and articles for inspiration.

Smokeyone 18th July 2007 04:52 PM

Thanks for the advice.
Would appreciate a link for inspiration.

Cheers

Leolabs 19th July 2007 01:43 AM

Or you can try the "Gainclone" at the chip amp section.Cheap and easy to build.

Smokeyone 19th July 2007 05:45 AM

Thanks for the the tip about the Gainclone.
Also had a look on the web - is this link also
a help !

http://myweb.tiscali.co.uk/nuukspot/...gainclone.html

Thanks


All times are GMT. The time now is 03:35 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2