diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   bass preamp and power amp (http://www.diyaudio.com/forums/solid-state/105177-bass-preamp-power-amp.html)

superseadragon 13th July 2007 04:16 AM

bass preamp and power amp
 
Ok sorry if this is a repeat thread. I am new to the diy audio scene and am not sure how often people look at old posts. ok on to business

I have looked through quite a few threads dealing with bass guitar preamp and power amps. A lot of people like the preamp from
albertkreuzer.com

For bass does anyone know if a 6 band EQ would give me any noticeable increase in control of sound? I have a 6 band EQ ckt here and I am sure i could make a it into a preamp with some opamps or transistors http://users.otenet.gr/~athsam/EQ_2.htm

for the power amp I dont think it will matter to me. I was wanting to make a 4x10" cabinet so I am not sure of the avg wattage used in these cabinets. If anyone has any suggestions on power amps?

superseadragon 13th July 2007 06:23 PM

preamp question
 
ok if I build my own preamp with the 6 band EQ that i have in the previous post. I think i would need to amplify the incoming signal from the guitar, run it through the EQ then have some sort of Volume control/amplification to send to the power amp. Anyone have any suggestions on the preamp configuration other than what i have just suggested? I may just put together a quick schematic of what I have suggested then have you geniuses show me what i am doing wrong :)


All times are GMT. The time now is 08:39 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2