|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
24th June 2007, 04:47 PM
|
#2 |
|
diyAudio Member
Join Date: May 2006
|
Well I don"t have any Specific schematics or PCB"s in Mind But I could tell you that probably the easiest way would probably be to make a Stereo Chipamp (LM3886??) and just put a couple mic Preamp channels at the input with a Pan Pot so you can adjust the Panning......
There are several Places that sell Chipamp PCB"s and there are alo several Good Mic preamp designs on the net of which most would be suitable ,You can even put a small Mixer curcuit between the Mic preamps and the Power amp stage which would take care of the Panning and summing of channels..... I am thinking of doing a simular Project but I haven"t had the Time or the Real Need at this time to start designing and building it yet.....To many projects on the go right now..... Good luck |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New 6F6 Amplifier Project | sorenj07 | Tubes / Valves | 9 | 26th January 2010 12:51 AM |
| Amplifier Project | gbowne1 | Tubes / Valves | 16 | 24th April 2008 10:55 PM |
| Pre-amplifier Project Help | tumler | Solid State | 2 | 8th August 2007 10:15 PM |
| Can anyone suggest an output stage FET for 2-4 W amplifier? | mefistofelez | Solid State | 0 | 26th February 2005 05:31 AM |
| What is the best amplifier project...? | Danyele82 | Solid State | 11 | 2nd May 2004 02:05 PM |
| New To Site? | Need Help? |
Suggest a DIY PA amplifier project
