powerpod 740 help needed

unclefester · 28th May 2007, 08:11 PM

Hi,
Anyone know were i can get a service manual or schematics for a phonic powerpod 740 deluxe ?

my amp went 'bang' the other night and i need to replace a few bits ...

Cheers

Dave

Leolabs · 29th May 2007, 01:14 AM

Does smoke come out????

unclefester · 30th May 2007, 02:12 PM

Quote:

Originally posted by Leolabs
Does smoke come out????

yes

can anyone help ????

Leolabs · 31st May 2007, 01:12 AM

Alright.Check for shorted semiconductors,opened power resistors.Assume that you do have a DMM with diode test function.Usually starts with output power transistors,then driver transistors,and sometimes the emitter resistors too.

Can you post the internal pictures of it???

unclefester · 31st May 2007, 03:28 PM

at first it was blowing fuses like they were dynamite

can't see any shorts on the board .... so i'm assuming one or more of the transistors is at fault ......

as soon as i get chance to pop back to the studio i will take some photo's and post them

Cheers

zeonrider · 31st May 2007, 03:44 PM

Hi , I just kiding.
I have full service manual in PDF file format !

Regards zeoN_Rider

PS. I worked in PHONIC Service Depatment in BELGRADE Serbia .

unclefester · 1st June 2007, 06:30 AM

could you e-mail it to me zeon rider .....

Many Thanks
Dave

zeonrider · 1st June 2007, 08:09 AM

Yes I could, but it is 3,52 Mb large. Maybe I can sand you only schematic . Full service manual have 45 pages.

Regards zeoN_Rider

unclefester · 1st June 2007, 01:35 PM

Hi

I have e-mailed you a different e-mail address that can accept large e-mails ....

I forgot that the one i signed up with can not accept them

Rgds
Dave

zeonrider · 1st June 2007, 08:36 PM

Look at dog@hotmail, i've send it there.
Regards zeoN_Rider

28th May 2007, 08:11 PM	#1
unclefester diyAudio Member Join Date: May 2007	powerpod 740 help needed Hi, Anyone know were i can get a service manual or schematics for a phonic powerpod 740 deluxe ? my amp went 'bang' the other night and i need to replace a few bits ... Cheers Dave

31st May 2007, 03:44 PM	#6
zeonrider diyAudio Member Join Date: Mar 2004 Location: Belgrade RS	Many talks doesn't works ! Hi , I just kiding. I have full service manual in PDF file format ! Regards zeoN_Rider PS. I worked in PHONIC Service Depatment in BELGRADE Serbia .

1st June 2007, 08:09 AM	#8
zeonrider diyAudio Member Join Date: Mar 2004 Location: Belgrade RS	Hi ! Yes I could, but it is 3,52 Mb large. Maybe I can sand you only schematic . Full service manual have 45 pages. Regards zeoN_Rider

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Phonic powerpod K16	nayakganesha	Solid State	0	24th October 2008 02:25 PM
Phonic Powerpod 740 schem	Rolf Startin	Solid State	0	9th October 2008 02:55 PM
Phonic Powerpod k12 Schems?	ProMusic	Solid State	0	4th July 2008 10:49 PM
Phonic Powerpod 740 Deluxe	unclefester	Instruments and Amps	2	30th May 2007 02:12 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th May 2007, 01:14 AM	#2
Leolabs diyAudio Member Join Date: Dec 2004 Location: Bukit Mertajam	Does smoke come out????

31st May 2007, 01:12 AM	#4
Leolabs diyAudio Member Join Date: Dec 2004 Location: Bukit Mertajam	Alright.Check for shorted semiconductors,opened power resistors.Assume that you do have a DMM with diode test function.Usually starts with output power transistors,then driver transistors,and sometimes the emitter resistors too. Can you post the internal pictures of it???

31st May 2007, 03:28 PM	#5
unclefester diyAudio Member Join Date: May 2007	at first it was blowing fuses like they were dynamite can't see any shorts on the board .... so i'm assuming one or more of the transistors is at fault ...... as soon as i get chance to pop back to the studio i will take some photo's and post them Cheers

1st June 2007, 06:30 AM	#7
unclefester diyAudio Member Join Date: May 2007	could you e-mail it to me zeon rider ..... Many Thanks Dave

1st June 2007, 01:35 PM	#9
unclefester diyAudio Member Join Date: May 2007	Hi I have e-mailed you a different e-mail address that can accept large e-mails .... I forgot that the one i signed up with can not accept them Rgds Dave

1st June 2007, 08:36 PM	#10
zeonrider diyAudio Member Join Date: Mar 2004 Location: Belgrade RS	Look at dog@hotmail, i've send it there. Regards zeoN_Rider

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read