diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Preamp needed? (http://www.diyaudio.com/forums/solid-state/102507-preamp-needed.html)

Stormrider 26th May 2007 01:37 PM

Preamp needed?
 
I am using a Behringer CX2310 two way active crossover which drives two Hafler power amps. A P-230 for subwoofers and a P-125 (or another P-230) for the mains in my stereo system. I use an xbox and a Yamaha cd player as my sources. I will be using rca to xlr (and vice versa) cables for the connections which i have already tested to make sure they did not create any hum or noise in the system.

Finally, my question is, do i need a preamp to buffer the signal from the sources to go into the XO or can i just use a 10K dual gang pot with a selector switch; a passive "preamp" ? Or will there be impedance issues?

Thank you for any help.


All times are GMT. The time now is 04:18 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2