Need to build JC 2 preamp - Page 43 - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 20th April 2013, 01:36 AM   #421
diyAudio Member
 
Join Date: Nov 2011
Quote:
Originally Posted by gk7 View Post
R8, R9, R10 are not present in Johns schematic, but my original modules obviously have a second pot for offset adjustment so I "borrowed" this from the ML-2 power amplifier which uses the same topology as input stage.
Thanks for the info, gk7. So, it was a bit of guesswork.. Did John "blessed" it?

Quote:
Please post it, I´m curious to see it.
It's a ML-5 record amplifier. PM me with you email - I'll send you some more.
Attached Images
File Type: gif ml-5-rec.gif (133.2 KB, 385 views)
  Reply With Quote
Old 23rd April 2013, 04:51 PM   #422
diyAudio Member
 
Join Date: Apr 2008
Hi guys,
because I do not need a phono stage, is it possible to build the preamp in the way shown in the picture?
Are there any possible problems with the stability?
Any ideas are welcome!
Attached Images
File Type: jpg image.jpg (272.1 KB, 349 views)
  Reply With Quote
Old 23rd April 2013, 05:09 PM   #423
diyAudio Member
 
john curl's Avatar
 
Join Date: Jul 2003
Location: berkeley ca
You make it too complex. Don't use the first gain block. Come in directly to the gain pot. That is how we do it.
  Reply With Quote
Old 23rd April 2013, 05:27 PM   #424
gk7 is offline gk7
diyAudio Member
 
Join Date: Oct 2007
Location: Vienna, Austria
Quote:
Originally Posted by elektroj View Post
It's a ML-5 record amplifier.
This one I knew, but what´s inside the ULD modules ?
  Reply With Quote
Old 23rd April 2013, 06:22 PM   #425
diyAudio Member
 
Join Date: Apr 2008
Quote:
Originally Posted by john curl View Post
You make it too complex. Don't use the first gain block. Come in directly to the gain pot. That is how we do it.
Thank you Mr. John Curl,

You are right - the simpler schematic is better. But in my case I have tube out CD Player which is anode out and the output impedance is around 1-1.2k which is too high to drive 10k gain pot. That is the reason to put the first gain block. Is there any other technique to avoid the use of the first module? In my case, what would you do?

Thank you in advance

Ivo
  Reply With Quote
Old 23rd April 2013, 06:27 PM   #426
diyAudio Member
 
john curl's Avatar
 
Join Date: Jul 2003
Location: berkeley ca
It would be best to just use an open loop dual fet follower.
  Reply With Quote
Old 24th April 2013, 12:30 AM   #427
diyAudio Member
 
Join Date: Nov 2011
Quote:
Originally Posted by gk7 View Post
This one I knew, but what´s inside the ULD modules ?
gk7, if you look at the ML-1 manual that YOU posted, you will see that line amps in the schematics are also marked ULD-4 :-)
  Reply With Quote
Old 24th April 2013, 06:13 AM   #428
gk7 is offline gk7
diyAudio Member
 
Join Date: Oct 2007
Location: Vienna, Austria
Yes, I know. And what does this tell us about the content of the ULD-4 ? I don´t get your point.
  Reply With Quote
Old 24th April 2013, 06:23 AM   #429
gk7 is offline gk7
diyAudio Member
 
Join Date: Oct 2007
Location: Vienna, Austria
Quote:
Originally Posted by john curl View Post
It would be best to just use an open loop dual fet follower.
Here is a nice one ;-)

http://www.diyaudio.com/forums/analo...ml#post3431096

Could be made with a LSK389:
http://www.linearsystems.com/assets/...ets/LSK389.pdf
  Reply With Quote
Old 24th April 2013, 09:31 AM   #430
AndrewT is offline AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
Quote:
Originally Posted by ivodonchev View Post
Thank you Mr. John Curl,

You are right - the simpler schematic is better. But in my case I have tube out CD Player which is anode out and the output impedance is around 1-1.2k which is too high to drive 10k gain pot. That is the reason to put the first gain block. Is there any other technique to avoid the use of the first module? In my case, what would you do?

Thank you in advance

Ivo
Quote:
Originally Posted by john curl View Post
It would be best to just use an open loop dual fet follower.
located at the tube output.
__________________
regards Andrew T.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
What preamp should I build? OzMikeH Tubes / Valves 154 21st January 2009 11:07 AM
BDT Preamp build jkeny Tubes / Valves 13 5th November 2008 12:37 AM
Build Preamp Jpoole908 Solid State 1 8th June 2008 12:47 AM


New To Site? Need Help?

All times are GMT. The time now is 01:52 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2