esp project 101

[sierramike]

any body has a schematic with components values for esp project 101
i heard is very musical and extremelly powerfull

thanks
smelectronic2002@yahoo.gr

[Greg Erskine]

hi sierramike,

You need to buy a board from Rod Elliott to get the proper schematic.

Here's the link:

http://sound.westhost.com/purchase.htm

regards

[gaborbela]

HI
It is really a great sounding amp .
Yes you have to purchase the pc boards to have access to the real schematic .
The board are good quality and very cheap . Rod will help if you have any question even if these will be your firs project you can be sure you can finnish it .

Regards

[XEAGLEKEEPER]

any body has a schematic with components values for esp project 101

Yes

You need to buy a board from Rod Elliott to get the proper schematic.

Concur

It is really a great sounding amp .

Agreed these amps kick butt,Period !! I built two,two channel hi-power version.They sound excellent....Do yourself a favor "buy the boards"


Dave

[sierramike]

finally we will buy the project 101 .......the truth is that i dont need to construct the project ...i only want to compair it with legend 8 and legend 4 me and sakis east_electronics@yahoo.gr working on

project 101 is not quasi like legend but drive should be arround the same ...we both like to investagate that .....

will see....... all ready contact rod elliot and now making shiping arangements

thanks

sierramike

[Greg Erskine]

Hey sierramike, are you friends with sakis or business partners?

[sierramike]

and started to construct legend 4 for sakis and legend 8 for me

we run int the same problems ....both

probably dr bora missed that rail voltage was arround 66 volts or sakis or both ..... whatever any way ...this circuit cannot operate as is in this voltage .....

we both now look if there is any chance to make any changes to get this running safelly .....

the truth is that we are constructing amps together ...we have to make about 15 each ......we have to construct in various forms stereo or mono or amplified speakers etch etch

we have to make all this and give almost for free to school for kids with special needs and used in music and multimedia courses for some really talented kids....


we are getting kind of rush now cause a) we are late and b ) we spended a lot of money ( that doesnt belong to us ) in making pcb and mosfets for a project that doesnt work .....

neet eee.....

[lineup]

Originally posted by sierramike
any body has a schematic with components values for esp project 101
i heard is very musical and extremelly powerfull
thanks

This is one good mosfet amplifier
No doubt about it

if we have some basic knowledge we can easily figure out components values
we probably have 200-300 persons at this forum that can do this

As this amplifier is very basic with few transistors
is easy to try some different current settings
for the different stages: input - vas -output
and see what works well.
---------------


As can be seen in this schematic Rod Elliott even tells us which transistors he use
2SK1058 and 2SJ162 should be possible to buy almost every country.
They are Lateral MOSFET from Japan.

Regards Lineup Lineup Audio Labs

[jaycee]

To be honest you could probably guess the part values easy enough, especially if you look at Rod's other amplifiers.

[lineup]

yeah, exactly, jaycee

and if we can not do it ourselves,
there are many around here to ask for some realistic values

i could make up a new schematic with good values
but i am kinda lazy for time being:
Because watching Olympic Games in China

regars