Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Fixed my Quadraflex 650FET R receiver
Fixed my Quadraflex 650FET R receiver
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 25th April 2007, 02:41 AM   #1
rhtatro is offline rhtatro  United States
diyAudio Member
Join Date: Mar 2007
Default Fixed my Quadraflex 650FET R receiver

Picked up a cheap ($28) stereo receiver with lateral Hitachi mosfet finals off of ebay but it had a problem....would distort badly at low volume levels and would require both A and B speaker switches to be turned on. Protection light would come on.
I assumed it was bad finals, so I ordered 4 new ones, 2Sk134 and 2SJ49 TO-3 cans, 2 each.
They finally arrived and I installed them, it has sockets that makes it easy, along with a bit of cpu thermal grease.
I powered her up and now it sounds just beautiful and I can crank it, the heatsink is much warmer than before, and all 4 big white bias resistors get warm as opposed to only one before.
It sure is fun to rescue a piece of vintage gear and at low cost also.

It still has one burned dial light, 8 volt at 0.34 amp, any ideas where to get one or more? How about a service manual or schematic?
Thanks, Bob Tatro
  Reply With Quote


Fixed my Quadraflex 650FET R receiverHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Quadraflex 575 issue--Answers anyone? karmapolice63 Solid State 0 19th August 2008 05:25 PM
Quadraflex schematics or s/m? John Durbin Solid State 0 6th April 2008 09:57 PM
Quadraflex Reference 650fet R service manual rhtatro Solid State 0 30th March 2007 11:41 PM
Hey i need help with receiver........EXPERTS HELP(two channel receiver) Andre Baptiste Parts 1 1st May 2004 11:20 AM
Carver receiver HR-742 fixed,but has DC offset steve p Analogue Source 1 25th March 2004 10:23 AM

New To Site? Need Help?

All times are GMT. The time now is 04:35 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio