Has any one gained to obtain 2N5416\2N3440 Spice models yet?
I know Intusoft and PSpice (Orcad) libraries should contain them. I don’t have either of the sofware packages so if anybody has an access to these, your help would be very much appreciated.
Argo
I know Intusoft and PSpice (Orcad) libraries should contain them. I don’t have either of the sofware packages so if anybody has an access to these, your help would be very much appreciated.
Argo
.MODEL 2N5416 PNP (IS=28.9269F BF=74.5987 NF=896.708M VAF=100 IKF=76.4007M
+ ISE=9.47636F NE=1.08715 BR=82.0042M IKR=992.378 ISC=99.984P RE=570.13M
+ RC=1.30722 CJE=152.963P VJE=999.929M MJE=485.682M CJC=43.3264P VJC=700.177M
+ MJC=414.315M FC=500.001M TF=4.11101N XTF=943.435M VTF=10.0714 ITF=11.115M
+ TR=34.7773U )
.MODEL 2N3440 NPN (IS=9.94996F BF=163.605 NF=913.046M VAF=100 IKF=15.5211M
+ ISE=100P NE=2.01619 BR=236.408M IKR=28.4896 ISC=21.8458F RE=329.989M
+ CJE=108.21P VJE=999.994M MJE=432.75M CJC=19.8784P VJC=700M MJC=317.349M
+ FC=500.001M TF=1N XTF=4.42138 VTF=10.0067 ITF=839.703F TR=12.5513U )
/Hugo 🙂
+ ISE=9.47636F NE=1.08715 BR=82.0042M IKR=992.378 ISC=99.984P RE=570.13M
+ RC=1.30722 CJE=152.963P VJE=999.929M MJE=485.682M CJC=43.3264P VJC=700.177M
+ MJC=414.315M FC=500.001M TF=4.11101N XTF=943.435M VTF=10.0714 ITF=11.115M
+ TR=34.7773U )
.MODEL 2N3440 NPN (IS=9.94996F BF=163.605 NF=913.046M VAF=100 IKF=15.5211M
+ ISE=100P NE=2.01619 BR=236.408M IKR=28.4896 ISC=21.8458F RE=329.989M
+ CJE=108.21P VJE=999.994M MJE=432.75M CJC=19.8784P VJC=700M MJC=317.349M
+ FC=500.001M TF=1N XTF=4.42138 VTF=10.0067 ITF=839.703F TR=12.5513U )
/Hugo 🙂
- Status
- Not open for further replies.