diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Software Tools (http://www.diyaudio.com/forums/software-tools/)
-   -   creating custom libraries in Eagle (http://www.diyaudio.com/forums/software-tools/234966-creating-custom-libraries-eagle.html)

Dan Moos 27th April 2013 11:21 PM

creating custom libraries in Eagle
 
I want to create a custom Library in Eagle containing some commonly used power amp transistors that are strangely lacking in the provided libraries. the 2n5551/5401 comes to mind.

Anyway, I have found the package type (to-92 EBC) and the symbols I want in an existing library. Everywhere I look on the net, they tell you how to scratch make packages and symbols, and they mention that you can copy them from existing libraries, which is what I want to do. What I can't find is how to copy the packages and symbols.

Do these files exist somewhere outside the libraries? I figure they must or there would be a lot of redundancy going on.

Dan Moos 28th April 2013 03:40 PM

Nevermind, I figured it out. Its kinda clunky, so if there is a better way I'm all ears. I open the library that contains the symbol and package I want, open the symbol, select it, copy it, close that library, open my new one, and paste it in. Same with packages. The only hiccup I had was that I didn't realize that I had to deliberately place the symbol/package on the origin mark, or it would make things difficult when placing parts.

Anyway, if there is a smoother way to do this, I'm all ears.


All times are GMT. The time now is 09:14 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2