
Home  Forums  Rules  Articles  diyAudio Store  Gallery  Wiki  Blogs  Register  Donations  FAQ  Calendar  Search  Today's Posts  Mark Forums Read  Search 
Software Tools SPICE, PCB CAD, speaker design and measurement software, calculators 

Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving 

Thread Tools  Search this Thread 
4th December 2012, 01:21 PM  #1 
diyAudio Member

LTSpice tube models
Hi all friend here!.
I want to know if any of you have the following tube models or know where can I find them. In the Norman Kohen they aren't and Google didn't give any answer. They are: ECF801  EC900  EF184  EF183 Many Thanks to all. Best Regards.
__________________
Osvaldo F. Zappacosta. Electronic Engineer UTN FRA from 2001. Argentine Ham Radio LW1DSE since 1987. 
4th December 2012, 02:58 PM  #2 
diyAudio Member
Join Date: Jul 2003
Location: Wayne, West Virginia

tubemodel_3.01_win.zip
EF184 would be 6EJ7 in the above zip. EC900/6HA5 * 6HA5 LTSpice model * Koren model (5 parameters): mean fit error 1.27016mA * Traced by Wayne Clay on 9/6/07 using Curve Captor v0.9 * from GE datasheet .subckt 6HA5 P G K Bp P K I= + (0.0007088605362m)*uramp(V(P,K)*ln(1.0+exp((0.0105 0076569)+ + (0.01050076569)*(16410.47684)*V(G,K)/sqrt((7.516756983k)+ + (V(P,K))**2)))/(0.01050076569))**(1.177167506) Cgp G P 0.56p ; 0.2p added Cgk G K 5p ; 0.7p added Cpk P K 3.1p ; 0.2p added .ends 6HA5 Last edited by cogsncogs; 4th December 2012 at 03:03 PM. 
4th December 2012, 03:25 PM  #3 
diyAudio Member

Many thanks, boy!!!
__________________
Osvaldo F. Zappacosta. Electronic Engineer UTN FRA from 2001. Argentine Ham Radio LW1DSE since 1987. 
4th December 2012, 03:26 PM  #4 
diyAudio Member
Join Date: Jul 2003
Location: Wayne, West Virginia

Here's more 6ha5 models:
looking for spice model of 6HA5 or similar tubes 
4th December 2012, 03:32 PM  #5 
diyAudio Member
Join Date: Jul 2003
Location: Wayne, West Virginia

6HM5
Code:
* 6HM5_k8 LTSpice model .subckt 6HM5_k8 P G K Bp P K I=(0.001154846006m)*uramp(V(P,K)*ln(1.0+(0.0008415623491)+exp((0.05049252985)+(0.05049252985)*((5446.000628)+(178663.8165m)*V(G,K))*V(G,K)/sqrt((0.2140185688)**2+(V(P,K)(162.56846))**2)))/(0.05049252985))**(1.356125726) .ends 6HM5_k8 Code:
* 6HM5 LTSpice model * Koren model (5 parameters): mean fit error 1.20978mA * Traced by Wayne Clay on 9/907 using Curve Captor v0.9 * from GE datasheet .subckt 6HM5k5 P G K Bp P K I= + (0.0005835219273m)*uramp(V(P,K)*ln(1.0+exp((0.005618954395)+ + (0.005618954395)*(31322.45425)*V(G,K)/sqrt((8.885069314k)+ + (V(P,K))**2)))/(0.005618954395))**(1.124019828) Cgp G P 0.54p ; 0.2p added Cgk G K 5.2p ; 0.7p added Cpk P K 3.2p ; 0.2p added .ends 6HM5k5 
4th December 2012, 03:35 PM  #6 
diyAudio Member

Ok, thanks again!!. Do you know any model for pentagrid tubes? (for make a audio compressor/expander) such as a 6BE6,6CS6, ECH83? Hot to manage two input signals? And for a 6BN6??? (very difficult I believe)
__________________
Osvaldo F. Zappacosta. Electronic Engineer UTN FRA from 2001. Argentine Ham Radio LW1DSE since 1987. 
4th December 2012, 04:14 PM  #7 
diyAudio Member
Join Date: Jul 2003
Location: Wayne, West Virginia

I don't have any good ones for those tubes. Here's 6BE6 and 6CS6 models that use an opamp symbol. To use 3f4 in LTSpice you may have to change ^ to **.
Code:
*Vacuum Tube pentagrid (sharp cutoff) .SUBCKT X6CS6close G 3 S K A *model written to use opamp symbol +in=g1,in=g3, +supply=g2g4, supply=kg5, out=plate *work in progress, not final * Calculate contribution to cathode current * *the number at the right end determines sharpness of knee Bat at 0 V=0.636*ATAN(V(A,K)/8) *the URAMP(V(S,K)/# mostly determines peak plate current, grid line spacing nearly constant *the number at the right end determines slope of grid lines (plate resistance) Bgs gs 0 V=URAMP(V(S,K)*1.6164+V(G,K)*24.75+V(A,K)/9000) Bgss gss 0 V=URAMP(V(S,K)*0.0005+V(3,K)*0.0075+V(A,K)/9000) *the exponent sets the linearity of grid line spacing, and big impact on peak plate currrent Bgs2 gs2 0 V=V(gs)^1.5 Bgs3 gs3 0 V=V(gss)^1.5 Bcath cc 0 V=V(gs2)*V(at) Ban an 0 V=V(gs2)*V(at)*(V(gs3)) * * Calculate anode current, grid line spacing adjust and peak plate current * Ba A K I=0.345E3*V(an) * * Calculate screen current * Bscrn sc 0 V=V(gs2)*(1.0V(at)) Bs S K I=(URAMP(0.64E3*V(sc)(1.45E3*(V(an)))))*0.29*(V(at)) * * Grid current (approximation  does not model low va/vs) * Bg G K I=(URAMP(V(G,K)+1)^1.5)*50E6 * * Capacitances * Cg1 G K 5.5p Cak A K 7.5p Cg3 3 S 7p Cg1g3 G 3 0.36p Cg1a G A 0.07p .ENDS X6CS6close ***************************** Code:
*Vacuum Tube pentagrid (g3 remote cutoff) .SUBCKT X6BE6close G 3 S K A *model written to use opamp symbol +in=g1,in=g3, +supply=g2g4, supply=kg5, out=plate *work in progress, not final * Calculate contribution to cathode current * *the number at the right end determines sharpness of knee Bat at 0 V=0.636*ATAN(V(A,K)/8) *the URAMP(V(S,K)/# mostly determines peak plate current, grid line spacing nearly constant *the number at the right end determines slope of grid lines (plate resistance) Bgs gs 0 V=URAMP(V(S,K)*1.6164+V(G,K)*24.75+V(A,K)/9000) Bgss gss 0 V=URAMP(V(S,K)*0.0005+V(3,K)*0.0045+V(A,K)/9000) *the exponent sets the linearity of grid line spacing, and big impact on peak plate currrent Bgs2 gs2 0 V=V(gs)^1.5 Bgs3 gs3 0 V=V(gss)^2.7 Bcath cc 0 V=V(gs2)*V(at) Ban an 0 V=V(gs2)*V(at)*(V(gs3)) * * Calculate anode current, grid line spacing adjust and peak plate current * Ba A K I=0.345E2*V(an) * * Calculate screen current * Bscrn sc 0 V=V(gs2)*(1.0V(at)) Bs S K I=(URAMP(2.34E4*V(sc)(0.95E2*(V(an)))))*0.29*(V(at)) * * Grid current (approximation  does not model low va/vs) * Bg G K I=(URAMP(V(G,K)+1)^1.5)*50E6 * * Capacitances * Cg1 G K 3p Cak A K 8p Cg3 3 S 7p Cg1g3 G 3 0.15p Cg1a G A 0.1p .ENDS X6BE6close *************************************** 
4th December 2012, 05:08 PM  #8 
diyAudio Member

Hey, what a master! Thank you once.
__________________
Osvaldo F. Zappacosta. Electronic Engineer UTN FRA from 2001. Argentine Ham Radio LW1DSE since 1987. 
5th December 2012, 11:48 AM  #9 
diyAudio Member

Has anybody the model for 6gj7/ecf801?
Thank you.
__________________
Osvaldo F. Zappacosta. Electronic Engineer UTN FRA from 2001. Argentine Ham Radio LW1DSE since 1987. 
6th December 2012, 04:06 PM  #10 
diyAudio Member
Join Date: Jul 2003
Location: Wayne, West Virginia

Hi Osvaldo, try this in LTSpice. It has the 6HM5 model I posted in this thread. When you use the model be sure the name of the subckt matches the name/value of the component and the inc file you place on the schematic.
Wayne 
Thread Tools  Search this Thread 


Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
GM70 and Other LTSpice Tube Models  kevinkr  Tubes / Valves  20  31st August 2012 10:45 AM 
Symbol for tube diode in LTspice  JoeAlders  Software Tools  7  29th April 2012 02:49 PM 
LtSpice  Russian tube models  Svein_B  Tubes / Valves  11  5th May 2010 02:55 AM 
Ltspice and Valve models  Melon Head  Software Tools  3  18th October 2009 08:35 AM 
Need help with tube models in LTSpice  Bitrex  Tubes / Valves  5  6th August 2009 07:28 PM 
New To Site?  Need Help? 