diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Software Tools (http://www.diyaudio.com/forums/software-tools/)
-   -   Dayton omnimic and minidsp Setup and measurements (http://www.diyaudio.com/forums/software-tools/222471-dayton-omnimic-minidsp-setup-measurements.html)

ugnius 29th October 2012 06:34 PM

Dayton omnimic and minidsp Setup and measurements
 
Hello, so I have been playing around with audio for a while, decided to post some stuff just for kicks and hopefully get some response from others.
Here is what i have hooked up for now:
marantz sr6006
minidsp
topping tp60 for lowpass
dayton dta-100a for highpass

Diy speakers - about .5 cube, ported(but im not paying attention to much to that right now), peerless hds 830875 for the woofer, and dayton rs28f tweeter.
Minidsp settings are setup in a way to get the best fr and phase. listening shows some things that i dont like, but the main reason was to get the best FR and phase, although theres a shift in phase around 350hz. bass is all messed up either way, so i am not paying attention to much below 300.
by the way i ran the omnimic cd tracks through oppo bd83, with all audessey eqs off on sr6006
Here are some pictures:
fullrange measurement:
http://norksystems.com/5.jpg
.
http://norksystems.com/4.jpg
.
http://norksystems.com/3.jpg
.
http://norksystems.com/2.jpg
.
http://norksystems.com/1.jpg

random pics:
http://norksystems.com/6.JPG
http://norksystems.com/7.JPG
http://norksystems.com/8.JPG
http://norksystems.com/10.JPG

any input at all welcome


All times are GMT. The time now is 10:47 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2