Have not tested your software yet, but good feature could be if you bind crossover, box_ simulation and measurements in "project". I've tried several design tools, but important thing is to bind schematics, simulation and real measurements to compare diffrent results and do not forget which measurement is for which crossover version.
Hello xjr100,
It is also possible to compare projects within Sofmea. To do so, you have to save curves when you simulate or optimize the crossover (checkbox on the top, near the optimize button).
Then rename manually the files created in the working directory, for example adding the crossover paramerters in the filename to be able to identify the file later...
Finally, go to the Visualize Menu in order to visualize a curve and uncheck "Make a new print". Set the scale and you will be able to plot different curves on the same graph, each time choosing a different color if you want to.
I hope it will help you
It is also possible to compare projects within Sofmea. To do so, you have to save curves when you simulate or optimize the crossover (checkbox on the top, near the optimize button).
Then rename manually the files created in the working directory, for example adding the crossover paramerters in the filename to be able to identify the file later...
Finally, go to the Visualize Menu in order to visualize a curve and uncheck "Make a new print". Set the scale and you will be able to plot different curves on the same graph, each time choosing a different color if you want to.
I hope it will help you
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.