sweep test - op filter
I just learned there is software to simulate op amp circuits. But honestly I am lost.
Which software to use
//prefferably free, or capable to do that in demo mode
to simulate a circuit:
//this is going to be a shelving filter
to sweep through the circuit f.ex. 30-10 000Hz and plot the frequency response as a graph?
//frequency vs db level
could it be done in 5spice?
have installed it and have drawn the circuit but don't really get it.
not even sure if it is possible to be done in this application
also, I use some generic symbol for OP, can i load a model for LM833 instead???
almost got it :)
Many here use the free powerful (but VERY user hostile) LT SPICE.
As a new user, you might find the free version of TINA available as a download from TI, to be much easier to use, and will do all you need.
You can use an 'ideal' op-amp in many versiions of SPICe (as in the attached TINA circuit) to check the basic operation, then replace it with the real op-amp model later.
|All times are GMT. The time now is 03:42 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2013 DragonByte Technologies Ltd.
Copyright ©1999-2013 diyAudio