Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Software Tools SPICE, PCB CAD, speaker design and measurement software, calculators

TruRTa set up
TruRTa set up
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 15th January 2012, 04:08 AM   #1
edgecreek is online now edgecreek  United States
diyAudio Member
Join Date: May 2011
Red face TruRTa set up

Hi all,
First post. Hope someone can help.
I am trying to set up the Dayton EMM-6 microphone and Tascam US122- MK11 phantom power to do measurements with TruRTA software. I seem to get conflicting information on the proper cabeling. Anyone know how this should be done?
  Reply With Quote
Old 29th April 2012, 06:12 PM   #2
damarsigns is offline damarsigns  Canada
diyAudio Member
Join Date: Jan 2011
ok i will try and help out the best that i can. First make sure that your computer has the tascam us122 recognized by right clicking the sound bar. Go to recording and playback devices individually. Make sure usb tascam are selected and are being used as the ( in and output defaults). You should be using the right or left output RCA to your amp or receiver and your XLR input for your mic. If you are using your computer to output the sound to you amp then make sure that it is selected in your devices menu. In truRTA make sure that the tascam is selected for input and your proper output is selected .. Also don’t run everything on max setting as you might get feedback from your mic put all the dials to half way and adjust from there. A simple test by hitting the go button will see if your mic is working properly .. also make sure (phantom power is turned on) .. i turn down the mic and output to half way and adjust output though the windows device level. Also in the device screen you will be able to see if the mic is working properly by preferences tab under levels. load your calibration mic file in to the true rta and do a volume calibration with a handheld SPL meter at the distance your mic is from the speaker you are testing. After don’t touch the volume or you will have to calibrate it again. don’t worry about voltage calibration unless you need to know how much voltage is being output to the amp. I do speaker driver testing and try to get to a spl of 1w\1m based on manufactures specs instead of measuring voltage.
hope this helps
  Reply With Quote


TruRTa set upHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
I need help with my set-up..... Mackdaddyz Subwoofers 2 29th January 2010 07:08 PM
WTT: One set of F4 boards for one set of F3 boards KT Swap Meet 0 16th May 2008 03:49 PM
Iron set for Paraglow (2A3) SET amplifier Alain Favret Swap Meet 1 19th March 2004 06:23 AM
How should I set this up? harukan99 Multi-Way 1 11th April 2001 06:08 PM

New To Site? Need Help?

All times are GMT. The time now is 07:13 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio