diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Software Tools (http://www.diyaudio.com/forums/software-tools/)
-   -   Need help drawing 12ax7 in Eagle (http://www.diyaudio.com/forums/software-tools/195357-need-help-drawing-12ax7-eagle.html)

emogstad 26th August 2011 11:16 AM

Need help drawing 12ax7 in Eagle
 
Hey guys!

I've just built a simple proto preamp for a guitar practice amp that I want to build. It works well and all, but...

I want to order some proper PCB's for the project, with PCB mount tubes. I use the "tubes"-library from cadsoftusa.com. How do I get the heater in with the two triodes in the schematic?

I've tried to add a separate heater, but it won't add to the excisting tube. This is a bit frustrating :P

Thanks for any help!

Fredenando 26th August 2011 02:34 PM

Here you have all the libraries that I have. Here you can find a folder called "tubes", this is what you need to add on this case but all's are usefull.

Libreras_Eagle_CAD.rar


All times are GMT. The time now is 09:51 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2