Trimming polygon pours in Eagle, help needed

SunRa · 27th March 2011, 12:45 PM

Hello,

I am now finishing a DAC board with AK4396 and I have a very specific question. How can I control the shape of the polygon ground plane in the marked areas below?

pinkmouse · 27th March 2011, 02:39 PM

Draw lines in the Restrict, (or could be Keepout, I've just had a fairly liquid lunch

), layers, that will stop the flood going where you don't want it to.

SunRa · 27th March 2011, 04:07 PM

Hi,

Thanks for the reply, it is indeed Restrict layer, it's much better now. I was looking for something like this for some time now.. (seems liquid lunches do help memory after-all

)

If you'd like to take a look at the entire development of the PCB, check here

27th March 2011, 12:45 PM	#1
SunRa diyAudio Member Join Date: Aug 2004 Location: Romania	Trimming polygon pours in Eagle, help needed Hello, I am now finishing a DAC board with AK4396 and I have a very specific question. How can I control the shape of the polygon ground plane in the marked areas below?

27th March 2011, 02:39 PM	#2
pinkmouse diyAudio Moderator Join Date: Apr 2002 Location: Chatham, England	Draw lines in the Restrict, (or could be Keepout, I've just had a fairly liquid lunch ), layers, that will stop the flood going where you don't want it to. __________________ Al I conceive of nothing, in religion, science or philosophy, that is more than the proper thing to wear, for a while. Charles Fort

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
complex polygon impedance calculating	IVX	Power Supplies	4	17th February 2008 06:26 AM
Eagle handholding needed	SY	Everything Else	37	29th January 2007 11:42 PM
WTD polygon mirror scanner motors	Tekko	Swap Meet	28	9th February 2006 12:40 PM
Trimming resistors	Jarno	Solid State	5	14th February 2004 07:24 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th March 2011, 04:07 PM	#3
SunRa diyAudio Member Join Date: Aug 2004 Location: Romania	Hi, Thanks for the reply, it is indeed Restrict layer, it's much better now. I was looking for something like this for some time now.. (seems liquid lunches do help memory after-all ) If you'd like to take a look at the entire development of the PCB, check here

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)