Eagle CAD libraies

MiiB · 8th November 2010, 08:18 PM

Hi...

Does anyone have or can point me to Eagle CAD libraries containing power BJT's and FET's...I am specifically looking for TO 247 and TO 264 types...and not so much the many TO-3 types that are in the labaries on the Eagle website...

Thanks

qusp · 21st November 2010, 12:02 PM

I have the zetex libraries which contain all those packages if thats any help?

h_a · 2nd December 2010, 01:31 PM

I can only strongly recommend to draw your own libraries.

I found that downloaded libraries often contain errors and if they don't they often don't adhere to the rules for text placement (use name layer instead of docu layer) which may mess up the silk screen.

Anyway, if you use downloaded libraries check them at least twice. There's no fun when pins are swapped or the clearance is too small and the part won't fit in the final pcb.

8th November 2010, 08:18 PM	#1
MiiB diyAudio Member Join Date: May 2005 Location: Denmark	Eagle CAD libraies Hi... Does anyone have or can point me to Eagle CAD libraries containing power BJT's and FET's...I am specifically looking for TO 247 and TO 264 types...and not so much the many TO-3 types that are in the labaries on the Eagle website... Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LT-spice VS Eagle... CAD cooperation...	MiiB	Solid State	5	15th May 2009 09:52 PM
Looking for Eagle CAD - Trade for tubes	ALBQ	Swap Meet	2	1st November 2004 12:15 PM
Eagle to P-CAD, how to convert	r!sc!	Chip Amps	0	18th March 2004 07:20 PM
Need help with Eagle cad	Shaun Perez	Everything Else	1	21st August 2003 07:35 AM
How do you do this in Eagle CAD?	djnigma	Everything Else	3	10th October 2002 05:23 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st November 2010, 12:02 PM	#2
qusp Sometimes a square peg fits a round hole just fine diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	I have the zetex libraries which contain all those packages if thats any help?

2nd December 2010, 01:31 PM	#3
h_a diyAudio Member Join Date: Sep 2006 Location: Graz, Austria	I can only strongly recommend to draw your own libraries. I found that downloaded libraries often contain errors and if they don't they often don't adhere to the rules for text placement (use name layer instead of docu layer) which may mess up the silk screen. Anyway, if you use downloaded libraries check them at least twice. There's no fun when pins are swapped or the clearance is too small and the part won't fit in the final pcb.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)