diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Siliconray Online Electronics Store (http://www.diyaudio.com/forums/siliconray-online-electronics-store/)
-   -   Free Laser Engraving Photo On Enclosure Service (http://www.diyaudio.com/forums/siliconray-online-electronics-store/220106-free-laser-engraving-photo-enclosure-service.html)

siliconray 21st September 2012 04:17 AM

Free Laser Engraving Photo On Enclosure Service
 
From now to the end of 2012 (if the earth still exist then), everyone can "print" a photo on the enclosure ordered from our store FOR FREE!

The photo is "printed" by our Finelaser engraving technology. The image can be engraved on any side of the enclosure. Usually this service will cost $10 to $20 for each enclosure, depend on the size of the image.

There're some rules for this promotion:
1. The front panel must be black (if you want to engrave on frontpanel), because the image can only engraved on black anodized aluminum.
2. the max size of image must be less than 10 square inch (or 6.5 square cm)
3. One free engraving for one enclosure only

A video will show you how the photos is engraved on the metal:
Laser engrave B2 bomber on metal plate - YouTube

below is some of the enclosures made for amateurs:

Isn't she sexy?
http://gallery.siliconray.com/var/re...g?m=1348199866

I like this idea very much
http://gallery.siliconray.com/var/re...g?m=1348199860

Just Cool
http://gallery.siliconray.com/var/re...g?m=1348199860

SirByrd 21st September 2012 04:42 AM

Wow, nice offer!

siliconray 21st September 2012 05:55 AM

Thanks!

Please send image in jpg format if you want to engrave photo. if it's logo or character, please send in cdr format.

If you do not want to engrave any image on it, and happen to have an iphone 4s, a free laser engraved iphone4/4s can go with the enclosure for free:

laser engraved iphone4/4s case

TheShaman 21st September 2012 08:19 AM

Nice one!
The schematic at the top panel is a nice idea for DIY projects - it looks cool. ;)

siliconray 21st September 2012 08:43 AM

yes I like this idea very much! This box is for our JLH headphone amplifier.

MagnumOpus 2nd December 2012 12:57 PM

I have this : Enclosure RE2607H 260x70x311

Is it possible to order a new frontpanel with laser etching?


Kenneth

siliconray 3rd December 2012 08:06 AM

I think it's OK to order a laser frontpanel from us. email to sales@siliconray.com


All times are GMT. The time now is 01:32 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2