6j4+6p6p preamplifier kit by sled108
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
nCore amplifiers built with Siliconray's enclosure RE2207 and group buy enclosure RE2212W-NC.
Engineered by Toms and Regnad, original post is here: Show Us Your Core-NCore!
Engineered by Toms and Regnad, original post is here: Show Us Your Core-NCore!
RE3220WH (x2)
Came with latching bulgin style vandal switches (led was 24v?) but I did not use them because I needed momentary, but nice nonetheless. Also, IEC sockets and a panel mount fuse holder. I requested they not come with any cutouts on the back panels, which are not pictured here. They did not charge me anything for this. Also the height is listed externally as 24mm taller than internally, this is because it comes with 4 16mm high aluminum feet and top / back / bottom are 4mm, front is 10mm, left side is 6mm.
I just put it together... need to do some heat shrinking and general tidying of wires, waiting on my rear panels.
Inside surface of heatsink is 300mm x 192mm and I think it's 42 mm thick, but about 24 mm of the 300 will not be usable due to the rectangular corner pieces and how the back piece is attached. (1cm per corner piece 4 mm for back).
Came with latching bulgin style vandal switches (led was 24v?) but I did not use them because I needed momentary, but nice nonetheless. Also, IEC sockets and a panel mount fuse holder. I requested they not come with any cutouts on the back panels, which are not pictured here. They did not charge me anything for this. Also the height is listed externally as 24mm taller than internally, this is because it comes with 4 16mm high aluminum feet and top / back / bottom are 4mm, front is 10mm, left side is 6mm.
I just put it together... need to do some heat shrinking and general tidying of wires, waiting on my rear panels.
Inside surface of heatsink is 300mm x 192mm and I think it's 42 mm thick, but about 24 mm of the 300 will not be usable due to the rectangular corner pieces and how the back piece is attached. (1cm per corner piece 4 mm for back).
Attachments
This is my first amp:
Patek Clone in Siliconray chassis
The box on top is just a temprary alps blue in a can
Patek Clone in Siliconray chassis
An externally hosted image should be here but it was not working when we last tested it.
The box on top is just a temprary alps blue in a can
A couple class D amps. Very nice quality enclosures!
BK
BK
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- More Vendors...
- Siliconray Online Electronics Store
- Post your photos of Siliconray products