Audio Project Amplifier Speaker Loudspeaker Kit
diyAudio.com diyAudio Forums Archive > Top > Amplifiers > Pass Labs
 
a question about C4,6,11 in The Pearl Phono - Click HERE for Original Thread
roger-k
The Caps 4 , 6 and 11 in The Pearl Phono stage is DigiKey P3154-ND.
Caps size, according to the catalogue:
Length: 20mm, Thickness: 8mm.

When I look at the pictures of the PCB these caps looks a lot smaller to me.

Is P3154-ND wrong, or do I misunderstand something?

catalogue: http://dkc3.digikey.com/PDF/EU071/P1203.pdf
vinylkid58
Those are max. allowable dimensions. The ones I received are a little smaller than those numbers, ~17.5mm x 5.5mm. There's lots of room on the board other than C4, which is up against C3.
This is a great phono BTW.

Enjoy,
Jeff

Page generated in 0.022454977035522 seconds with 17 queries,
spending 0.01005554 doing MySQL queries and 0.01239944 doing PHP things.

Powered by: Search Engine Indexer and vBulletin
Copyright ©1999-2008 diyAudio.com