| confused about carlosfm reg. psu - Click HERE for Original Thread |
| endia |
hi,
i'm so confused about carlosfm's snubber parts and values. which are the snubber parts?
R7, R8, C9, C10 on the schematic or 0.1R/1W + 3.3 nf as his sidenote?
his schematic;
http://myweb.tiscali.co.uk/nuukspot...ub.reg.psu2.png
and is this a correct understanding?
thanks..
 |
|
|
| markiemrboo |
| quote: | Originally posted by endia
R7, R8, C9, C10 on the schematic or 0.1R/1W + 3.3 nf as his sidenote?
|
Both, as far as I know... :) |
|
|
| Nuuk |
| The 0.1R and 3.3nF cap are the snubber components. The 100nF is the bypass cap for the 2200uF cap. :att'n: |
|
|
| endia |
so the schematic is correct..
markiemrboo, nuuk, thanks a lot.
nuuk, also thanks for your helpful site :) |
|
|
| AndrewT |
Hi,
I think r7 & c9 are the snubber for the PSU wiring.
The 0r1 & 3.3nF is the snubber for the cabling and traces to the amplifier. |
|
|
|
|
