| The Saint |
Introducing the New NX150 Synergy From Aussie Amplifiers.
This version of the NX150, dubbed the NX150 Synergy, has been designed in collaboration with Kendrick Pavey of www.esteemaudio.com from Melbourne, Australia. The amplifier has undergone a number of critical listening auditions with Melbourne audiophiles, to bring out the very best this topology can offer.
The result is an amplifier that not only demonstrates very high objective performance specifications, but also the NX150 Synergy excels in the subjective attributes that audiophiles crave.
Key highlights of this revision include, but are not limited to:
Redesigned low noise Constant Current Sources on Input Stage
Highly Refined Component selection in critical signal path areas
Improved power supply decoupling
Improved PCB layout for Lower Noise and Distortion
High end Auricap coupling capacitors used
3 Ounce Double Sided PTH PCB
Improved connectivity to PCB using quick connect spades. |
|
|
| spind |
Very nice! Will this one be available in kit form?
thanks,
Steve. |
|
|
| The Saint |
Hi Spind
At the moment it is only available as an assemble module.
But I will be working on a kit version for this module. |
|
|
| The Saint |
| Here a photo of the NX150 Synergy as a 3 channel amplifier. |
|
|
| The Saint |
| And one of the rear of the chassis |
|
|
| The Saint |
| :wave2: :drink: |
|
|
| The Saint |
| Here is the inside of the 3 channel amplifier |
|
|
| Zen Mod |
168 views
you cockoo Aussie
:clown:
boyz are just not prepared for questions .....yet.....:devilr: |
|
|
| FastEddy |
Nice job!!
(The purpose of a three channel amp is ?? ... Left, right and woof ??)
I have a pair of Anthony's (regular) AussieAmplifier.com NX-150 modules and can attest to the very nice design and superb audio quality .... seamless performance, plenty of guts through out all frequencies, almost tube like in performance at clipping ... :D |
|
|
| The Saint |
Hi Ed
These Amplifiers are going to a client in the UK who ordered them
purpose built for his Surround Souind System.
Chassis came from ATI in Thailand....
Not cheap but nicely made :) |
|
|
| FastEddy |
Yes, a nice chassis ... and a quite reasonable layout.
Wondering also: What are the basic differences between your NX-150 and this newer, Synergy design?
Efficiencies? ... distortion? ... and is it "plug compatible" with the previous design?
:smash:
(Of passing interest: the Taliban have been hitting and hacking the DNS servers and international fiber trunk repeaters, playing havoc with much of the Australian streaming radio/TV to North America ... :mad: ...) |
|
|
| The Saint |
Hi Ed
The Synergy range has these changes and improvements
Redesigned low noise Constant Current Sources on Input Stage
Highly Refined Component selection in critical signal path areas
Improved power supply decoupling
Improved PCB layout for Lower Noise and Distortion
High end Auricap coupling capacitors used
3 Ounce Double Sided PTH PCB
Improved connectivity to PCB using quick connect spades
The sound quality difference is striking compared to the NX150 version One.
The Synergy soundstage is deeper, more detailed....
and yes the Synergy is a plug in replacement for the version One |
|
|
| jaybombalous |
| Can't wait to see a kit of this synergy nx - 150, thats why of course they do call this place DIY audio. :) |
|
|
| jeffry_widjaja |
Im order NX 150 synergy from aussieamplifiers
and i receive in one week
very fast service
very nice product
thank you "the saint"
rgds
jeffry |
|
|
|
