| KBK |
20 pieces up for grabs. All AU series.
Very much prefer a trade for suface mount 627/637.
I have a device which requires 30 of them...but surface mount.. All I have left is DIP (8) package units.
Not really interested in shipping off onesies and twosies. I'd like to get rid of all of them at once, if at all possible. Let's haggle!
And a barely used DCX2496 (or two).
One with mild mods, oscon caps all over the place...and OPA2604 chips here and there (input board), mildly modded PS, etc.
Second unit, nearly NIB, bone stock.
Both with manuals and boxes. |
|
|
| sqlkev |
What are you looking to get for the dcx2496?
I'd like to know the prices of either one.
Thanks |
|
|
| KBK |
I just offered a guy in switzerland the slightly modded one for $235. mint, no scratches if you squint and it is in another room. Just kidding. Should be fine. I put a rca jack on it for the digital input, as well. minor stuff. just trying to assess the design to see of it was worth modding out. It is definitely worth modding...but I've moved on.
I grabbed a DEQX 2.6P recently,and the op amp upgrade for it, is going to cost more than the cash I'll get for the two DCX2496's! Ouch! That's with Ti paying for more than half of them....I'm hoping.....I'm calling them now. I have to sound confident and important (ie, with i, knowing what I'm doing, etc).....at the same time I beg. Such is life.
I need..FIFTY OPA627's. All SMD. and 25 brown dog adapters. That's $200, just for the adapters. They work great, though! |
|
|
| KBK |
The universe has run out of the SMD version of this chip.
HOWEVER, I can get many of the others from the TI sample program.
Will swap dip for SMD versions. (I need SMD, will supply DIP). Or whatever.
Let me know. |
|
|
| KBK |
Sold most of the DIP chips, to one buyer. Kept three for a guy who wants to trade for 3 627AU's.
Found 5x 637BU smd chips in my pile of stuff!...
looking to trade them for 627AU series.
Both DCX2496's are still available, will likely go on fleabay soon. |
|
|
| KBK |
Looking for $175 for the 'bone stock' one, I paid more for it when they weren't available..and I left it in the box. It had been previously used for a short period of time by a DIY board member. If you are on this board, you don't care about warranty, you are looking to strip the unit anyway!
The other, I'll let go for $200. Get them out the door! Still have the 5 637BU smd op-amps. Somebody must want those. |
|
|
| Cobra2 |
How many OPA627AU for a DCX ?
(also have a few AD825 & AD8610 & AD8620)
Arne K |
|
|
| KBK |
If you have OPA627UA chips, I can get you anything in the same series (for the sake of simplicity) as a trade. 1 for one. For example, I can get you 30(x) OPA627AP's or 30(x) OPA637BP (PDIP package) for your 30(x) OPA627UA's (smd's).
If you have them, let me know, and I will get the appropriate # of chips to do a trade with. Looking to do trades in the 10-30x chips only, too much hassle to do smaller lots..however, don't hesitate to throw your chips in the pot, if you have fewer. Like 6 or so. If swapping a smaller lot, I'd prefer it if was done on the north american continent. It's faster in terms of delivery. For example I did a 637/627 swap in three days, for 12 units.
There will be no TI stock replenishing of most of the 627/637 series chip until at least March 15th, that's too late for me..so..with TI's full knowledge, I'm getting samples of other chips and doing a swap for the 627AU's from people who have them.
I'm modifying a piece of audio gear that was obviously designed by computer nerds and pro audio folk. No clue about cleaner, simpler design pathways and methods, or parts quality over 'textbook' implementation of chips and support sructure. It takes FIFTY 627 opamps to fix it. It didn't need to be this complex...but it is...and the 627's will help tremendously, compared to what is already in there. |
|
|
| mbcouple |
KBK,
Sent you an email yesterday, and didnt hear back. Send me an email when you get a chance regarding the behringers.
Thanks,
Hans |
|
|
| KBK |
will do. I have few people in the que before you, whom I will have to give preference to. I saw the email (it is my work email and I'm not there right now), but forgot to reply to it. Apologies. I think you wanted both, and that would be good, but I think I have two folk in Canada who replied quite a bit earlier. Shipping to those folks is easier from here, besides the earlier reply. However, I have preference for Arnie too..as he has some 627's to trade, but that may not work out either. We shall see.
Also dumping an Acoustat TNT 200 amp (200wpc, stock), a Parasound 1500 amp (205 wpc, slightly modded), but those will not be diy pricing, they are both Audiogon and Ebay material, I'm just giving you folks a first stab at them, before they hit those shores. Oh yeah, a NAD(less) THX 2400 too. cleaning house. Beer money for the audio show. |
|
|
| Cobra2 |
I do not have enough opamps...(or cant afford the shipping)
Arne K |
|
|
| KBK |
don't count yourself out of it Arne. You've got 12 chips..and I want them.
The stock unit is likely gone to a guy in the Toronto area. |
|
|
| Cobra2 |
Found 2 more :clown:
And a couple in DIP shape.
Also have a pair Brown-dog adapters for both DIP & Dual-SMD...
Arne K |
|
|
| KBK |
| need to be dual smd to single smd, the most expensive units that the brown dog folks make. $7 each. ouch. but they work well, as you can add caps to them very nicely. |
|
|
| KBK |
| quote: | Originally posted by Tristanc1
YGM
Tristan |
Ok. just the modded one left. Do you want it? $200US. In box, manuals, etc. You are first on the list (time response wise). |
|
|
| Tristanc1 |
Sorry man, hadn't heard from you so I grabbed one off of audiogon over the weekend:(
If, for whatever reason, it doesn't end up selling drop me an email and i'll see if I can scrounge together some more money and take it off your hands so you won't have to resort to selling on ebay ;)
Tristan |
|
|
| mbcouple |
KBK,
I am still interested,
Hans |
|
|
| KBK |
Arne, I can't do it right now. I do apologize.
But there is another thing that can be done here.
Ok Hans, you have been replied to.
As for the rest of you guys, I need your 627AU SMD opamps.
TI has granted me my wish, (I was fully upfront with them) and is shipping me 30 627AP DIP chips to horse trade all those 627AU SMD chips out here on the forum. Don't be suprised if the odd TI guy looks in on this thread. :p
I'm attempting to make a 'world class' digital crossover, for an upcoming show. As stated, I need another 30 627AU chips to do so (part of the package), and you guys have them all! TI won't have any for another 5 weeks or so, and that's too late to play it safe, for me. Too close to the show date. So let's trade those SMD's for some DIPS.
Arne has first dibs, he has 16 SMD versions. A few of you have some as well. I owe a guy three already, and another guy, (Dennis, who got the first stock DCX) four. Depending on how many Arne wants, if he wants any at all, there is either 23 or about 7 left.
I will apologize up front and right now, for I will only ship the chips out after recieving yours first, unless I feel the risk is low enough. Please do not be insulted. I refuse to be caught short by shipping issues or the like. It is not a personal attack against the honesty of the other trader, it is simply me being prudent with a pertinent issue, with limited resources and time. |
|
|
| KBK |
| I have the 30 627 DIP chips to trade for SIOC 627's, so let's get at 'er! |
|
|
| KBK |
26 OPA627AP left to trade.
Arne, are you game for this? I will hold 16 aside until I hear from you.
Thee people have now turned down the mildly modded unit. It is ~almost~ back up on the block, I have one guy to contact. Stock unit is shipping today. |
|
|
| KBK |
Still have 26 PDIP 627's to trade of surface mount ones.
Still have one slightly modded DCX2496 to sell. Odd, no one wants that one. Price is right. |
|
|
| Cobra2 |
I have 16 x OPA627
& 2 x browndog 2->1 adapters
(and others), but low on cash...
Dip is not interesting...
Arne K |
|
|
| dshortt9 |
I will buy 6 of the OPA627AP dip.
E-mail me |
|
|
| KBK |
| quote: | Originally posted by Cobra2
I have 16 x OPA627
& 2 x browndog 2->1 adapters
(and others), but low on cash...
Dip is not interesting...
Arne K |
$65, and the two adapters (if they are of the stand-up smd type) and the 16 smds..and you can have the DCX. That way, I can recover the funds by selling some of the DIP chips at about $8-10 each. I do not wish to break the agreement I made with TI, which is to swap the DIP chips for SMD's. It looks like I might have to bend it, just a bit. |
|
|
| dietcoke |
| I sent some mail. :) |
|
|
| KBK |
Try emailing again. I don't recall receiving it. I looked.....it wain't.
A DCX2496 is still up for grabs, unless arne gets back to me with a offer for $50US along with the stuff he has, for his 16 OPA627UA's.
I'm now in the apparent business of buying and selling. |
|
|
| dietcoke |
| Sorry, apparently I'm unable to immediately post or send emails yet. I usually only read posts so I have no idea how long until I can. :dead: |
|
|
| KBK |
| Still lotsa PDIP 627's to trade for SMD versions. Still a DCX2496 available, Arne's not getting back to me. |
|
|
| Cobra2 |
As I already told: too little cash here...
Arne K |
|
|
| evsentry3 |
Apparently I haven't posted enough to have rights to email you directly about the DCX...but I am interested in it!
Thanks!!
Mark |
|
|
| KBK |
go to the website and email me through there. You know, the 'wuh-wuh-wuh' (www) at the bottom of this post.
It's kbk@goosystems.com |
|
|
| bowdown |
How much will the DCX cost to send to Perth Western Australia postcode is 6031.
Cheers |
|
|
| KBK |
the DCX may be sold by this afternoon...so staty tuned. Shipping to Oz is a fortune. I'd expect standard parcel post to hit about $50. Parcel post is a risk.... UPS is far less. I'd advise against it, unless they are $500 each in Oz. I don't expect that they are.
UPS about $120-140. |
|
|
| KBK |
| quote: | Originally posted by Cobra2
As I already told: too little cash here...
Arne K |
OK then, Arne. Sell them to me. let's haggle! |
|
|
| KBK |
| Anyone want to buy some DIP package OPA627AP? |
|
|
| Cobra2 |
I can sell you 10 x
$ 150 incl shipping!
:devilr:
Arne K |
|
|
| KBK |
| Too high. I'm in the middle of buying 12 for $60, plus shipping, from the NL. :p |
|
|
| KBK |
all DCX2496: SOLD
Still 24 OPA627AP DIP chips left. |
|
|
| KBK |
someone sent me 3 627AU chips. My head is a bit lost on this one. Dan M. sent them to me...
anyone want to buy some opa627AP DIPs? |
|
|
| aau70 |
| I need 4, how much do you want to sell them? |
|
|
| nero |
hi kbk,
how many do u really need? i have stock..email me ..we discuss.
rick. |
|
|
| KBK |
Still have about 18 of the 627AP DIP chips. I ----WANT--- OPA627UA SIOC suface mount chips as trade. No sales of these chips. I NEED those chips. Sorry for the bad seeming attitude.
Earlier in the thread I iterated that I want to only trade and I want to get my chips first, then I send you these..in case..in case I'm being ripped off..or if there is a screw up. I can't afford screw ups.
Well...I paid for 12 surface mount units..and they have been held up in dutch customs for a MONTH.
Well..I a paid another guy for 15 of them. He said 4-5 days delivery. After he has the cash it's suddenly..... 4 days before he ships them...and then it's suddely 7-14 days for delivery. And he tells me the tracking # system is suddenly not working.
So you can see why I'm being so cautious.
Even with all that..ever since the time I started this thread..I've only managed to get THREE OPA627UA chips. A lousy three. What a colossal screw up.
If you have some, please step forward.
Two-for-one.
thanks! |
|
|
| KBK |
In the EU, there are about 70 or so still available. None in North america. I simply will not pay the price I see in the adverts from Farnell in europe, though.
I'm checking my deliveries this morning at work to see if any have arrived, and then possibly buying some from another source, at $8.00US each. Only 10 available, but that might be enough to get by. Perhaps some of the ones I paid for might actually arrive.
There would not be a supply problem, except for the fact that the demand for this chip suprised TI who had not alloted such a great amount of manufacturing time and space for this series of Burr Brown products, and the manufacturing is difficult, due to the custom trimmed aspect of each individual chip.
But, I do thank you for your efforts! |
|
|
| KBK |
My goodies from both sellers have finally arrived. Yeah! Whoopie! and all that stuff.
I still have 18 of the 627 dips, I might keep them for other projects. Thanks all for your patience. |
|
|
|
