Audio Project Amplifier Speaker Loudspeaker Kit
diyAudio.com diyAudio Forums Archive > Top > Market Place > Group Buys
Pages: [1] 2 
Offical Details 2nd Aleph P1.7 Board GB - Click HERE for Original Thread
peterpan188
Update 01/19/2007: As promised, I removed some people who didn't send the confirmation email. Now there are only 3 people left to confirm which should be quick. If you see your name in bold, email me at alephp1.7@gmail.com to confirm, before 01/23/07 12:00AM EST. Remember to give me your username, address, amount of boards, and payment option. I still need to hear from Veteran on payment other than PayPal, so please check for updates. FOr those who got my email about payment option but still haven't replied yet, please do so ASAP.

Update 01/15/2007: There are now 6 tin plated boards left, and I have removed those who didn't repond in email. Please check the list below and see if your name is on BOLD. Sene me a email to alephp1.7@gmail.com to confirm for you boards. You have until 01/19/2007 12:00AM EST to do that.

Update 01/11/2007: As promised, I am moving the waiting list into the big list below. They are sorted according to time of post on this thread, not by email.

Those who has their name below, bolded, has to send me a email confirming the amount of board, type and your address before 01/15/2007 00:00AM EST. I have added the members and anticipated amount of boards, so then the total will be 50 Tin plated and 20 Gold Plated boards.


If you miss this, I will subsitute your names with the members on the line after you. I have already take names off the list from those who didn't respond. That way, I think will be most fair to all members.

Turns out that there is great interest in the Gold Plated Boards, while the Tin Plated Boards count remain at 30.

I have filled members on the waiting list, that came after the all gold plated sets are filled, with TIN PLATED boards. This way all boards limits are fulfilled.

You can keep it that way, or if you absolutedly DO NOT want the TIN PLATED boards, let me know.


You will be GIVING UP your tin plated sets, but after 01/15/2007, you might have a chance to get the GOLD plated sets, if those who has the GOLD plated set do not confirm in email. It's your decision here.

Update 01/05/2007: Many members have already confirmed the numbers, while about 10 of them didn't. If you see your username in bold below, please send me a email including your username, amount of board your will be buying and which type (Gold/Tin) ASAP. I will start adding people from the waiting list on 1/11/07 00:00AM EST. As the people from the waitlist confirm their numbers, you won't be able to the boards you want.

Once again, you DO NOT need to send me a email about the amount of boards you want IF you posted in this thread. As you post in this thread, you are automatically in the waiting list. Sending me a email about amount of boards you want does not do anything, if you are not on the list below.

Also, If you are not on the list below, that means you need to post here for the amount of boards you want, if you haven't done so, so you will be in the waiting list. I will only add people into the waiting list according to post in this thread.

This thread follows the GB interest thread, a group buy of P1.7 preamplifier boards and its companion power supply. This thread will serve a better role in info update, since I can edit the first post.

Veteran (Damian) ordered boards in sets, and he will be distributing them. Notice that 1 set = 2 mono P1.7 amplifier boards + 2 mono power supply boards. Only integer number of sets will be offered. Veteran ordered in total 50 stanard tin plated sets, and 30 gold plated sets.

Pricing are the following:
1 tin plated set = 10EURO = 13USD
1 gold plated set = 15EURO = 20USD
Shipping will depend on your location.
If you pay with PayPal, there will be a 5% fee added.

Due to the misunderstanding in the amount of boards, I orginally posted that the GB closes at 50 sets, and obviously this is incorrect since there will be 80 sets in total. Also, there was not any information about different plating.

So here is how it goes. If you posted your interest on the interest thread before I last updated the list there, you name will be listed below, with the amount of sets next to your name. I will need everyone to send me an email to the following address: alephp1.7@gmail.com with the amount of sets you want, the plating, and your address. If I receive your email, it will shown below, and you will receive a confirmation email from me. Before I receive the email, I will assume everyone wants the stanard (tin plated) sets

YOU MUST SEND ME THE EMAIL IN ORDER TO BUY THE BOARDS!!!

The GB will close when 50 tin sets and 30 gold sets are full, and the list is complied in chronological order. Since now the tin plated sets numbers exceeded 50, and I would assume some people will switch to gold plated sets, so if you are interested in boards, and didn't post in the interest thread or posted after I last updated the list there, post here and if there are rooms, you will be counted in.

Best Regard,
Peter

id / Tin set(s) / Gold set(s) / Email Received
--------------------------------------------------------
peterpan188/3/2/YES
yoke/2/1/YES
Cobra2/1/1/YES
analog_sa/1/1/YES
Stevox/1/0/YES
JC Fardo/1/0/YES
cbcassell/2/2/YES
sts9fan/0/1/YES
spence/2/0/YES
twitchie/1/1/YES
1/137/4/0/YES
odermatt/1/0/YES
sergiusz/0/1/YES
dg2sac/1/1/YES
mizuno67/0/1/YES
alfadue/0/2/YES
Dennis Hui/2/0/YES
neil_kaye/0/1/YES
Hastur/0/1/YES
pollypocket/0/2/YES
seve/2/0/YES
Yunick/2/0/YES
AMV8/0/3/YES
noelectrix/1/0/YES
SDJungle/0/1/YES
Michael Mik/0/1/YES
hifi_cat/1/1/YES
eapavant/1/0/YES
huldra/1/1/YES
Tim F/0/2/YES
Pars/1/0/YES
Jerzy Bem/0/1/YES
Saki_zg 3/2/YES
MartinJB/1/0/YES
Michi124/2/0/YES
joebar/1/0/YES
delsix/1/0/YES
jeffshort2000/1/0/YES
bobgroger/1/0/YES
Tom75/1/0/YES
Valeriano/1/0/YES
D97GT/1/0/YES
touchdown/1/0/YES
DVBjunky/1/0/YES


Apogee/1/0/NO
freakyone/1/0/NO
nihonJR/2/0/NO


Total Tin Sets: 50
Total Tin Sets: 50

updated 18 jan 07
apassgear
Peter,

You have mail.

Thanks and Happy New Year:cool:
Tim F
I didn't post my interest on the original thread but would like to add my name to buy TWO complete gold plated sets if there are any available.
I can pay by paypal as requested.
Thanks
EvilYoda
YGM :)
Pars
I also had not posted an interest in the earlier thread, but would like (1) tin set if available. If tin is not avail., I would take a gold set.

Thanks!

Chris
Hastur
YGM
Jerzy Bem
Hi,

I posted on the other thread but after last update of the list.

Please count me in for one set of gold-plated PCBs.

Thanks.
JC Fardo
Peterpan188
YGM :) JC
1/137
YGM also....
Saki_zg
I've sent you mail but haven't recived any reply.
please count me in for 5 sets of gold plated boards.
thanks
MartinJB
Hi,

I hope I am not too late! Please count me in for one set of gold plated PCBs.

I can pay by Paypal if required.

Thank you.
hifi_cat
Hi
I send a email at the posted adress.
No repley.


1 gold plated pcb set
1 tin plated pcb set

Thanks
Primetime
Hi,
I would like to have a set - gold plated. Thanks.
apassgear
Peter,

Thanks for your reply, I'll be on the waiting list then.:xeye: :rolleyes:
peterpan188
Hey guys,

I am waiting for moderator's permission on editing the first post, and in the mean time,I replied to all the emails sent to me, and this will be done daily.

Again, if you have post for interest on the interest thread, your name will be on the list. If not, you will be on the waiting list if you post on here, if you haven't already done so. I will only add your name onto the waiting list if you post here, not through email. This will better serve as the counter since everyone can view the post and there will be no confusion on who's first.

Please remember to put your username/id in your email, otherwise I can't find you on the list.

Peter
randytsuch
I am interested in a pair of boards, and will take whatever is available.

Randy
Michi124
Peter,

Thanks for your reply and clarification.
I'm in for two gold plated sets.
jswen
I am interested in either tin or gold. 1 set.
joebar
Hi !

I've posted in the "second run..." thread.

Please count me in for a gold plated stereo set (2xP1.7 and 2xps).

Best regards

Holger
tobias_svensk
peterpan, you haven't replied to my email yet :)

/Tobias
delsix
Hi, I am interested in either tin or gold. 1 set please. Email also sent.
jeffshort2000
Hi,
I sent a email for a set also. Whatever is available, tin or gold.

Thanks,
Jeff
sergiusz
Hi,

Just sent the email for one gold plated stereo set.

Thanks!
alfadue
hi Peter,
please check your mail
Marco
Dennis Hui
Hi Peter,

I've also sent an email.

Thanks,
Dennis
bobgroger
Mail sent. 1 set of Gold plated.
bobgroger
Tom75
If still available ...

1 set of boards ... any make.

thanks Tom
delsix
Hi peter,
check your email and post 21 above.
I think my post was in moderation which is why you didn't see it.
Valeriano
Hi Peter,

one stereo set gold plated for me .. thanks!!

.vale.
mizuno67
Hi peterpan188,

i can“t give you a mail because i'm a new menber.

i want the gold ones.

thx
bernd
2002tii
E-Mail just sent, wishing to buy 2 set goldplated pcb`s.
Hope it`s not to late!
D97GT
Count me in for 1 set of gold plated if they are available.
Saki_zg
any list updates?
touchdown
If it's not too late, count me in for 1 one set of gold plated pcb.

thanks
touchdown - Nicola
AMV8
Hi

If I am in time I would like three sets of boards. I prefer gold plated boards but will also take tin.

Don (AMV8)
DVBjunky
Hello,


count me in for 1 Set of the PCB sets and will take whatever is available (tin or gold).

I would pay via paypal

I hope I understand it right: just post here, do not send email :-)

Am I right?

Regards

Aykan
DVBjunky
wlai
I'll like to be on the waiting list for 2 gold PCBs, thanks
TJ
hi , i want 1 set gold PCB . please send me an email to comfirm .
thank
D97GT
I had previously asked for 1 set of Gold but I can go Tin as well, whichever is available! Thx
Saki_zg
peter... you have recived about 3 mails from me :D
delsix
hi email sent, asked for gold but happy with tin, many thanks
del
MartinJB
Email sent: Previously I asked for 1 set gold plated PCBs but I would be happy with a tin plated set.

Thank you
Apogee
Hello,

I would also like to request 1 set of gold boards. I would take tin as a second choice if no gold is available.

Thank you,
freakyone
Count me in also
1 set of gold boards

Cheers
nihonJR
Hello,

I would like to request 2 set of gold boards and 1 set of tin board

Thanks
Fox
Count me in for either 1 set of goldplated or tinplated PCBs.

All the best,

Jan-Peter Vos

PS

You have got mail!
peterpan188
Just a quick reminder here, if you see your username below, please send me a email to confirm your board order ASAP. I will remove your name once Monday reaches me.

Tim F
Jerzy Bem
MartinJB
Primetime
apassgear
randytsuch
jswen
joebar
bobgroger
Tom75
2002tii

Peter
Jerzy Bem
Hi Peter,

YGM

Thanks!
apassgear
Peter,

YGM
rsponholtz
I'd like to get two tin sets.

Thanks for putting this together!
-Ross
MartinJB
YGM
joebar
Hi Peter,

you got a mail

Holger
tobias_svensk
Hello Peter

I mailed you some weeks ago and said that I wanted 1 gold set, don't know if I'm in on that or not but put me up for 1 gold set (1 tin set as a second choice

Thanks!
Tom75
Hi Peter,

the system does not allow sending e-mails since I am still under moderation. However I would like to confirm my board order.

Best wishes,
Tom
DVBjunky
Hello,

my question is: What happens if the second run ends? Any chance of a 3rd Run?

best regards


DVBjunky
Tim F
Hi Peter
YGM
D97GT
Woo Hoo, I finally made the list!
Peter YGM... Thx
delsix
Hi, if there is still any boards left I should a second set please
many thanks
delsix
email sent
DVBjunky
Hi Peter,

YGM at alephp1.7@gmail.com :-)

I am on the list.....I think...I have to cry :-)

Best regards

DVBjunky
freakyone
Hello Peter

Since I missed on the second set count me in if theres a third

Cheers
touchdown
Hi Peter,

you got my mail

thanks
Nicola
wirewiggler
please add me to list of next group buy for one set

Thanks
Bill
pchw
Hi Peter,

Sent you an email for 2 sets.

Thanks,

-fredv-
B&W_arthur
Hi Peter:

I would like to have 2 sets. Please count me in.
Mail sent to you.

Regards,
Arthur
JLWitt
Hi Peter,

Sent you an email for 1 tin plated set.

Thanks,

John
Apogee
Hi Peter,

Confirmed via email.

Definitely would prefer gold if any way possible.

Payment will be via Paypal once I know the correct total (gold or tin & shipping).

Thanks for the help!

Best regards,
powerp
Hi Peter,

Pls count me in for 1 set of tin plated.
veteran
Peterpan188 did a great job - thank you. Boards are ready and I will receive them Tuesday.

You will receive email with information about shipment and board cost (including PayPal fee for members who decided to pay this way).
2002tii
Since I was away from home last weekend, I sent my confirmation email 6 hours to late.:bawling:
No internet connection in the deep woods where we drove our cars on ice .:cool:

So once again I sign up in the waitinglist for 2 sets gold plated PCBs.
apassgear
Hi Peterpan,

Do we get a confirmation on orders?

Havent heard of you on this thread, any details as how we stand? :)
twitchie
Thanks for all the hard work Peter :cheers:

Paypal payment sent to you Damian, thanks for making another run
Primetime
Hi Peter,

YGM!!

Thanks.
peterpan188
Hi Everyone,

As of now, all boards are confirmed and all payment choice are made. All 50 tin plated sets and 30 gold plated sets are reserved. I know that there are still some of you that would like to get the boards, but I guess you will have to wait for the next run.

I apologize to all about the mistakes that I have made, missing emails, names, so and so forth. If I sound mean and cold in my emails, I would like to apologize too. In some sense, I would like to think that timing should be well kept as professionally as I can, so I was really strict on the dead lines. I know this frustrated some of you, but it was only done so that all members will have a fair chance of getting the boards.

I have to admit that as this is the first time I stepped up to help, there are things that I did not manage as well as I could, but nonetheless, this has been a very good and fun experience for me. If there is a chance for me to help again, if you guys permit, I would love to do it again. ;)

When I get my boards, I will be asking tons of questions on the forum..... so hopefully you more experienced builders can help :D

Thank you,
Peter
D97GT
Peter and Damian, Thanks for all the work coodinating this GP!
nihonJR
Peter and Damian, Hip Hip Hurrah !!!!!!!!!!!!

Thanks for this GP:cool: :D :cool:
yoke
To peterpan188 and/or Veteran

When do we nead to make payment and to who ??? untill what date ???

I didn't get that info so ???
veteran
I emailed you 21-01-2007. Please contact me - I will replay with details.
yoke
hi Veteran...I send you mail :-)
Valeriano
Peter: thanks for your help, greatly appreciated.

Damian: payment sent, any idea about availability/delivery?


Thanks guys!
ciao :D
.vale.
veteran
Yes. Boards are ready - I will pack them (envelops are addressed, documentation printed) and send Friday. This is my only free day this week ;)
Saki_zg
peter, veteran.... can you send me prices ?:)
yoke will pay for both of us but i need to know how much money i need to send him :D
veteran
This is how set of boards look - special edition for DiyAudio ;)
JC Fardo
Many thanks to Peter for get involved in this GB and Veteran for boards availability. Have a Belvedere :D

All my best
alfadue
Any new about boards?I'm waiting for mine....
Marco
DVBjunky
Be patience! They have maybe Jobs and a life...and so they check the "payments" 1-2 times per week.....and shipped these...and with approx. 80 PCB Kits...it will took some while....the mailing service needs also time for shipping...and so...it will be there, when it will be there!!
veteran
Most packages are on there way ;) There is about fifteen more waiting for tomorrow and three awaiting payments. I will wait one more week for members who didn't replay to my emails.
veteran
This is a standard package - boards are in two bubbled envelops (do avoid damages) with printed documentations.

One more thing - boards in this GB have new precise soldermask ;)
1/137
I have received no information on how to pay....
How does one pay?

rt
Jerzy Bem
I got no information on payment either.
jeffshort2000
I have received nothing on payment either.
samsagaz
i want to purchase some boards, im from Argentina :D, is possible?
1/137
I would like to pay for the boards I requested but I have received no information on how to do it...so I'll ask again...How do I pay for these boards?

rt
Jerzy Bem
May I have information on payment, please?

I need total amount and paypal email address.

md
1/137
Another try.....I would like payment information for these boards...

Thank you,
rt
veteran
All (payed/confirmed) boards send. Most of you should receive them by the end of next week.

jeffshort2000, contact me please

Jerzy Bem, you will receive boards tomorrow or Monday, I will contact you once again in a minute.
1/137
I would like information on how to pay for the boards I asked for...I still have not hear anything....
Thank you,
rt
veteran
1/137, I sended you three messages. Check your spam folder maybe :) Replaying one more time...
1/137
Sorry for the problem.....I have checked the spam folder...try richard.talcott@gmail.com

I really do not understand the problem..

Thank you
rt
1/137
That WORKED!

VERY sorry for the problem....don't know why!

I will paypal you right now!

Again, Thank You for YOUR PATIENCE!

rt
1/137
DONE!

Sorry for the confusion...I have no idea what happened...

rt

Page generated in 0.13019204139709 seconds with 17 queries,
spending 0.01018763 doing MySQL queries and 0.12000442 doing PHP things.

Powered by: Search Engine Indexer and vBulletin
Copyright ©1999-2008 diyAudio.com