Audio Project Amplifier Speaker Loudspeaker Kit
diyAudio.com diyAudio Forums Archive > Top > Market Place > Group Buys
 
Second run on Aleph P1.7 boards - Click HERE for Original Thread
JC Fardo
quote:

Originally posted by peterpan188

Hey guys,

I missed the last run, so I emailed veteran asking if he has extra boards. He mentioned we can have another board GB. So is there interest here, or I should open up another thread for interest check?

Regard,
Peter

Yoke

I'am interested

I think it's beter to open another tread - like, second run on Aleph P1.7 boards

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

I´m interested too.

peterpan188
Yoke
JC Fardo
1/137
I am also interested.
rt
cbcassell
I would be as well.

Chris
freakyone
Count me in!
peterpan188
I would think it would be more appropiate to ask veteran if we can start the run with his board. I just PMed him, and utill we can have a permission from him, I do not think the group buy would be appropiate.

Regard,
Peter
JC Fardo
It´s fine to me. Better yet after holidays. :)

JC
yoke
quote:
Originally posted by peterpan188
I would think it would be more appropiate to ask veteran if we can start the run with his board. I just PMed him, and utill we can have a permission from him, I do not think the group buy would be appropiate.

Regard,
Peter

Any news from Veteran ?
Stevox
I am also interested.

Peter.
peterpan188
Hey guys,
I got a go from veteran, and he will be ordering more boards for P1.7. So I would like everyone to put down the number of boards you want starting from this thread, and I will try to keep a daily update on the list.

I will start it off.

peterpan188 - 6 P1.7 boards, 6 Power Supply Board
yoke
I'am for:

6 x Aleph P1.7 PCB
2 or 6 x power supllayPCB ( depending on price )
Cobra2
of Aleph P1.7 PCB + 2 PSU PCB

Arne K
yoke
sorry... could not edit my previus post so;

if this is one set of PCB ( 2 x Aleph P1.7 and 2 x power supllay ) at price around 12$ I'am for 3 sets , 6 x Aleph P1.7 and 6 x PS...

http://www.audio.webd.pl/pdf/DIYAud...cb_diyaudio.pdf

Veteran post from (one more) ALEPH P 1.7 clone

http://www.diyaudio.com/forums/show...3909#post873909
analog_sa
2 x Aleph P1.7 and 6 x PS
Stevox
Stevox - 2 P1.7 boards, 2 Power Supply Board

Peter.
JC Fardo
JC Fardo - 1 PCB set

http://www.audio.webd.pl/pdf/DIYAud...cb_diyaudio.pdf
cbcassell
I would be in for:
4 - main boards, and
4 - power supply boards.

Chris
Gooch
I would be in for 2 x Aleph P1.7 and 2 x PS


Regards,
Dave
sts9fan
I am in for two PCB sets.
is that 4xmain and 4x PS?
spence
Two sets please. I.e. 4 x P1.7, 4 x PSU.

Thanks!!
twitchie
Twitchie - in for 2 sets

4 - main boards
4 - power supply boards

(ie - 2 sets of pcbs as in the pdf linked)
http://www.audio.webd.pl/pdf/DIYAud...cb_diyaudio.pdf

Stephen
1/137
4 sets......4 stereo pair + 8 ps boards.

rt
freakyone
2 P1.7 boards, 2 Power Supply Board

Cheers
Dan
KT
....and thanks, again, to Nelson Pass!
peterpan188
Hey guys,
I haven't heard back from veteran about pricing yet, so we will have to wait for that. But you are welcomed to put down how many boards you want.

Sorry for the confusion, according to this PCB file, boards will be in stereo sets. PCB will be available as sets of 2 P1.7 mono channel board, and sets of 2 power supply board.

Below is the current list of those who posted on this thread. Please check on your order, if there is any mistake, PM me.

User name P1.7 Stereo Board Dual Power Supply Board
peterpan188 3 3
yoke 3 3
Cobra2 1 1
analog_sa 1 3
Stevox 1 1
JC Fardo 1 1
cbcassell 2 2
Gooch 1 1
sts9fan 2 2
spence 2 2
twitchie 2 2
1/137 4 4
freakyone 1 1

Regard,
Peter
boonedog
I'd be in for 2 sets.
odermatt
I would also like one set of PCB for a stereo 1.7.


Thank you.

Peter
sergiusz
Hello,

I would also like to have a stereo set (2xP1.7 and 2xps).

THANKS!
dg2sac
Hi !

Count me in for a stereo set (2xP1.7 and 2xps) too !

Have a nice day !

Robert.
mizuno67
Hi !

Count me in for a stereo set (2xP1.7 and 2xps) too !

bernd
alfadue
Hi all!
I would also like to have a stereo set (2xP1.7 and 2xpsu).
Thanks!

Marco
Dennis Hui
I am also interested in a stereo set (2 1.7 and 2 PSU boards)

Thanks,
Dennis
AnalogHifi
Hello,

I would also like to have a stereo set (2xP1.7 and 2xps).

Many Thanks!

Andreas
AnalogHifi
Hello,

i mailed with a Friend, i take also 2. stereo set.:)
neil_kaye
Hi,
Please put me down for a pair of sterero boards (2PSu + 2 P1.7)

Cheers and thanks
Neil
Hastur
Missed out last time due to work, would like a stereo set. 2 main & 2 ps.
pollypocket
Please count me in for the following:

4 P1.7 boards, 4 Power Supply Boards

thanks,

Paul
seve
I would be interested in two sets.

Thanks
Martin
Yunick
I'm in for 4 P1.7 boards and 4 Power Supply Boards.

Thanks Dave
ticktock
Hi fellows,

i'm joining here for the first time.

My name is Holger, 37 ys old, from germany.

I like have a stereo pair as well to build my alephs!

@ Andreas: should we oder together (I woluld transfer the money to you before)

Greets, Holger
AMV8
Hi
I would like 3 stereo sets if posible

E mail Don.Whittle@kbr.com

on
noelectrix
hi,

i also would like to order one stereo set. it is my first project beside a simple crossover!
so wish me good luck.

s.fischer at gmx.info

i really thank you a lot for your nice work.
SDJungle
...and the next one with one complete stereo-set please. ;)
Michael Mik
Please count me in for one stereo set
Thanks
Michael
Michael Mik
Hallo JC,
may be you can think of altering the gap between the connection points to 5 mm, so these nice screw terminals (5 mm grid) can be used...
Michael Mik
Could it be, that the symbols for the signal transistor cases must be rearranged a bit?
Michael Mik
I try again
JC Fardo
Hallo Michael

I think Veteran had in mind allow larger soldering area at these points. Lets see what he answer because that should be a new transparency ($$ ?)

Copper Side



Merry Xmas
wirewiggler
I am in for (2) mono boards and (2) pwr sply boards

Thanks
Bill
hifi_cat
Hi
I would like 2 stereo sets if posible:D

Thomas
eapavant
I would like one set. eapavant
analogdiy
I am in for 2 sets

4 - main boards
4 - power supply boards

thanks
huldra
I am in for 2 stereo sets
peterpan188
Hey guys,

I wish everyone is still enjoying their holidays, and in the meantime, I still haven't heard back from veteran yet about some details yet. Guess he is enjoying some big Christmas meal ;)

He did mention in the last email that he will only have 50 sets (2x Mono P1.7 Board and 2x mono PS board), but the list I have now exceeded that amount (57 for P1.7 and 59 for PS). I will close up for further interest, and see if veteran have enough board to supply.

Attached is the updated list, in text file. Again, please check the board amount that you are interested in, and send me an email if there is any mistake.

Merry Christmas and Happy New Year
Peter
peterpan188
Seems like the naming of the file got some problems, here's a better one.

Peter
joebar
Hi !

Count me in for a stereo set (2xP1.7 and 2xps) too !

Best regards

Holger
spence
Peter or Veteran,

Do either of you have the parts stuffing guide for these boards, or will it be included with the shipment?

Thanks, Spence
apassgear
Sounds great, I'm in also with a set of PCB's (stereo) if this is possible at this late stage for a GB:cool:
wim
Can you please count me in for 2 complete stereo boards (each board containing 2xP1.7 and 2xps)?

Thanks and a happy new year!
Valeriano
Hi Damian,

I'm interested in a stereo set : 2x p1.7 + 2x ps


Thanks
Happy New Year!
.vale.
Jerzy Bem
Hi,

I would like one stereo set if still possible.

Thanks.
EvilYoda
Darn, late again it seems...I'd just want one stereo set of boards. I also don't know too much about the previous GB, are there instructions for parts and assembly? Lastly, I need a balanced pre, would there be any issues?
peterpan188
Please Read,
Offical detail 2nd P1.7 GB

Regard,
Peter
goodspeaker
Need stereo set too.
Please inform.
bou
Hi,

I would greatly appreciate a stereo set.

Thank you
risperdal
Hello,
will be nice to get a stereo set. Thanks.
mstr
Hello!

Hope I´m not too late... If possible, please count me in for 2 stereo sets ( 4x main board, 4x power supply)

Thanks!
w7afb
New to this forum. I would like 2 sets of the boards.
Thanks
Jerry Clark email; w7afb@comcast.net
dg2sac
Sry but,

the whole thing was trough 2 months ago...

See posting #62...

73 es 55 de
Robert.
pinkmouse
quote:
Originally posted by dg2sac
...the whole thing was trough 2 months ago...

:cop:

I'll close this thread to save more confusion then. ;)

Page generated in 0.096265077590942 seconds with 17 queries,
spending 0.01319051 doing MySQL queries and 0.08307457 doing PHP things.

Powered by: Search Engine Indexer and vBulletin
Copyright ©1999-2008 diyAudio.com