Audio Project Amplifier Speaker Loudspeaker Kit
diyAudio.com diyAudio Forums Archive > Top > Amplifiers > Class D
 
Hope you guys can help me out a little with this project - Click HERE for Original Thread
85Dave
I have a set of 4 Ohm Polk Audio shelf speakers that I want to turn into powered monitors for my recording at my dell desktop.

I have looked around and found the Sonic Impact 5066 portable amp but im not sure if i really want to get it. From what I can see, its a great little product but needs mods to get it running well and the power supply is pricy at $20...

I need to have inputs in RCA, Phone (both 1/4 and 1/8") and binding posts.

I like to leave my computer speakers on day and night so running on batteries is no good...


So im looking for something that:
- will run two 4 ohm speakers
- at least 15W of power
- 120V input
- lots of inputs.

Any ideas on what I should get for this project?

Thanks

Here are some photos of the mixer board and speakers on my desktop:



panomaniac
How are your soldering skills? One of the kits form www.41hz.com cold do nicely.

If you're up to building the amp, that would be a good direction.
85Dave
soldering skills are great, modded some boss guitar pedals back a week ago and sold them on ebay for a great price.




ill look up some of the kits at that link, thanks

also, im not looking to spend much...probably $50 at most...
85Dave
Second thoughts...

I'm not really into all those serface mounts... I'm mainly looking for am amp that I can buy that will work well and needs little to no mods to run good.

I'm really starting to lead towards just getting that sonic 5066 and I'll probably do a few mods keeping the original case. My plans are to swap out the original pot for another better quality one and add a switch for power in place of the pot/switch combo.

I'll also put quality binding posts on that back
Oh yea and ill have it run on 120V with a wall wort power pack...12.5V input max for this setup from what ive heard

Going along with this I found this site
http://members.tripod.com/talkgarde...impact_5066.htm

It's a great page to follow but some of the links to the parts are bad...

-------

I need to know what I should use to replace the current POT in there and what power supply I should get..and where
85Dave
Im still looking to get that sonic amp but for now I'm covered...my dad pulled out an old amp/receiver from the old TV setup...its breaking up a little on the bass but its got some power

This is a Onkyo Integra TX88


Page generated in 0.02918004989624 seconds with 17 queries,
spending 0.00787902 doing MySQL queries and 0.02130103 doing PHP things.

Powered by: Search Engine Indexer and vBulletin
Copyright ©1999-2008 diyAudio.com