diyAudio Forums Archive > Top > Amplifiers > Solid State leach amp powersupply ? - Click HERE for Original Thread provyf what is part c3p and what does it do? AndrewT Hi, Leach's parts list is usually pretty good. I would be surprised if he had missed this out. Try using 100nF 100V or higher Plastic film or Ceramic. The schematic shows the central ground connected to the safety ground. They are not the same thing. Connect the chassis to the safety ground. Connect all else to the audio ground. jacco vermeulen quote: Originally posted by seanmacss what is part c3p and what does it do? Let me get this before Ace will. http://users.ece.gatech.edu/~mleach/lowtim/part3.html C3P - 0.1 uF 250 V capacitor (DigiKey E2104-ND). This capacitor suppresses RF generated by switching transients in the bridge rectifier. AKA Snubber acenovelty Yup........

Page generated in 0.019897937774658 seconds with 17 queries,
spending 0.00853086 doing MySQL queries and 0.01136708 doing PHP things.

Powered by: Search Engine Indexer and vBulletin
Copyright ©1999-2008 diyAudio.com