| fosforo |
Hi to all,
I am italian and i am very interested in DIY project.
I would like to ask you some questions and evenctually some best practices for building my first project based on CHARLIZE from DIYPARADISE.COM.
Please, try to understand my bad english.
I bought the kit because i was very curious about Tripath and having to sonorize a small home studio i thinked that it was a good solution.
Googling around and also inside the forum i found some good review of the kit.
This is the setup
PSU switching Skynet 8080
CAPS Nichicon 10000 Uf/63 Volt
Charlize with air core inductors
Alps Blu 50K
Golden RCA connectors
Golden speakers connectors
OFC calble for connecting CHARLIZE -> SPEAKERS CONNECTORS
CAT 7 Cable for connecting RCA - ALPS - CHARLIZE
Solder with high percentage of silver
HIFI2000 Enclosure
Charlize will play a chain based on:
.CD Marantz CD63-MkII KI
.Indiana Line 4.30
.Signal Cable YANXING OIL INJECTED (Attached you will find a photo of this strange cable)
.Speaker Cable TNT-Star
I would like to have your opinions on such type of configuration and on the components selected.
I have a doubt about AC Line filter: Is it right to use it or not?
If yes, why?
Thank you very much for every reply
Bye
Fabio |
|
|
| vt4c |
Hi Fabio,
The list looks fine:) |
|
|
|
