diyAudio Forums Archive > Top > Amplifiers > Tubes ARC reference II schematic - Click HERE for Original Thread dennis00 Is there any one can help me to get the ARC reference II schematic ( Includin the standrad and MKII )?:D Gordy The closest you can get is most likely the LS25: http://www.arcdb.ws/LS25/LS25.html Brett quote: Originally posted by Gordy The closest you can get is most likely the LS25: http://www.arcdb.ws/LS25/LS25.html And people really paid all that money for that? Lots of people really listen with their eyes. kevinkr Cmos switch and serial bus digital volume control ics, all I can say is ugh.. Note that the DG409 is an analog cmos switch and is not used for balance, this just selects which wiper tap is used on the cascaded attenuator circuit. (High gain/low gain) Balance is performed by loading differing codes into the left and right high/low attenuators ics to offset the gain one against the other. Clever yes, tube purist friendly - NO! Brett quote: Originally posted by kevinkr Cmos switch and serial bus digital volume control ics, all I can say is ugh.. My response was similar, but far less polite.

Page generated in 0.020944118499756 seconds with 17 queries,
spending 0.00816321 doing MySQL queries and 0.01278090 doing PHP things.

Powered by: Search Engine Indexer and vBulletin
Copyright ©1999-2008 diyAudio.com