| stewartwen |
| I AM IN THE PROCESS OF REBUILDING AN EMINENT TECHNOLOGY ET2 TONE ARM. I FOUND THAT THE SPINDLE TUBE IS NOT TRUE! THER IS ASMALL RIPPLE IN THE TUBE. CAN ANYONE HELP WITH SUGGESTIONS OR REPLACEMENT PARTS? |
|
|
| stewartwen |
I HAVE FOUND A SOURCE FOR EMINENT TECHNOLOGY AIR BEARING SPARES. THEY ARE AVAILIABLE FROM EMINENT TECHNOLOGY VIA THE WEBSITE. SPINDLES COST LESS THAN £75.
ALTHOUGH ALTERNATIVE TUBES ARE READILY AVAILIABLE BUT WILL HAVE TO BE MACHINED SPECIALLY BY THE LOCAL SHOP!
STEWARTWEN |
|
|
| iain |
Hi how did the rebuild go?
Did you change/learn anything.
I have an old ET2 and keep toying with bringing it out of retirement or selling it.
Cheers
Iain |
|
|
| stewartwen |
Hi there I couldnt get any spares from Mr Thigpen so the ET2 is still not rebuilt. If you are willing to sell your old ET2 I would like to purchase it. I am so upset at the lack of spares for these arms because they sound soooooooooo much better than single point pick up arms.
Ah well another project bites the dust!
Stewart |
|
|
| iain |
I might be interested have sent you an email. May ebay, but await your reply.
Cheers
iain |
|
|
| stewartwen |
Hi Iain, tried to email you last nite. It came back twice, hhmmmmm
Well down to the plot!I am interested in your old ET2. I have a proposal for you if you email me at:
stewartwen@yahoo.co.uk
I will outline my plan. I would apreciate some pix of the arm. Does it have the air pump and manual and alignment guage. Do you know how old the arm is? Any way please email me and we will talk.
Stewart |
|
|
| iain |
Hi
stewartwen. You have pm. You will get an error message when you reply, but please ignore it
regards
Iain |
|
|
|
