| nick_g_evans |
So, I'm trying to piece together a gainclone kit. I've seen a great, very cheap selection of raidal and axial capacitors at www.apexjr.com. I think I might purchase a few, but I on't know if some are better for audio. Some that I have my eye on are the following:
1000
35V
Electrolytic Sprague $0.50
3300
35V
Electrolytic Nippon/Chem-Con $0.50
1000 Mfd
50V
Electrolytic Nichicon $0.30
1000 Mfd
100V
Electrolytic Panasonic $0.45
2200Mfd
35V
Electrolytic ECI $0.35
I'm thinking that the Panasonic's would be a good choice, but, truthfully, I have no idea why.
Any input? Apexjr, are you out there? |
|
|
| rabstg |
Hi Nick-
Are you going to use a regulated pwr supply?
Are you going to have these caps next to the chip amp or in a central supply?
I would use at least the 50V caps on unregulated supplies. |
|
|
| Apex Jr |
I have been selling the 1000 uf 100V mostly and 1000 Uf
50V not as much, but both will work...
Steve @ Apex Jr. |
|
|
| rabstg |
Hey Steve-
Have you had any luck in finding insulators for mounting the LM3886T's?
That is one of the few items that are impeding progress. |
|
|
| Apex Jr |
I'll try and call you tomorrow... I haven't looked...
Steve |
|
|
|
