Audio Project Amplifier Speaker Loudspeaker Kit
diyAudio.com diyAudio Forums Archive > Top > Amplifiers > Solid State
 
Kinergetics KBA75 - Click HERE for Original Thread
ben goh
Hi all,

Does anyone happen to have the schematic for this

power amp?

Greatly appreciated for any help.
tortello
.. I found it, at least!
This schematic was published on "Suono", an Italian magazine, no November 1993.
The schematic was directly derived from the PCBs, but some parts are not drawn - such as the NE5532 integrator, but the audio circuit should be complete.
The bias currents are 1.15mA, 12mA and 1.3/1.9 for the 1st, 2nd and power stages: for this one were noted two values, for left and right channel respectively.
Hope this helps.
Marcello
ben goh
Hi Tortello,

Thank you so much for your help in finding the

schematic for me, I really appreciated it.

Ben

Page generated in 0.017059087753296 seconds with 16 queries,
spending 0.00687504 doing MySQL queries and 0.01018405 doing PHP things.

Powered by: Search Engine Indexer and vBulletin
Copyright ©1999-2009 diyAudio.com

Please support our sponsor.