| crackpot |
hi,
i am clearing out my projects cabinet and have some nice unused VIFA drivers to sell !
2 x D19SD-05-08, shielded 19mm plastic dome tweeters
2 x P21-REX, 8" bass drivers
2 x M22WR-09, 8" bass drivers
2 x M25W-009, 8" bass drivers
2 x P21-RFX/P, 8" midbass drivers
2 x M26WR-XX-04, longthrow 8" bass drivers
2 x M18WN-19-04, 6.5" midbass drivers
also some used VOLT drivers
1 x Ls201, 8" bass driver
1 x M2500.1, 10" midrange driver (marked dustcap)
I don't mind boxing them and sending them internationally since am based in the UK.
any offers ? otherwise will sell on e-bay (have excellent feedback)
crackpot |
|
|
| dunderchief |
how do you feel about the 8" volt speakers?
The Volt website says they're specifically for two way applications, and while I was hoping to go 3 way, I've heard great things about Volt drivers.
Also I have no idea how much to offer on these. If you could give me an idea I'd appreciate it.
Cheers
-Steve |
|
|
| dunderchief |
Also, now that I've done some more looking....
How does the M2500.1 compare to the B2500.1.
Could it be used in a midbass application? Thanks. I'm just now researching Volt drivers so I may have some more questions.
-Steve |
|
|
| crackpot |
the volt 8" is a pressed-steel chassis version of their studio driver, it sounds very sweet up to 3.5kHz and so is prefect for a 2 way box with a nice 1" dome tweeter
the M2500 is a dedicated high power midrange either for horn loading or direct radiating, It has not got the excursion or parameters to make it suitable for any kind of bass reproduction but sound fanstatic with vocals !
note i only have one of each, sorry !
I do have a pair of unused B2500 which i wasn't going to sell and make some subs with, but if I am made a good offer ...
crackpot |
|
|
| dunderchief |
Dang, I didn't see that there was only one of each. I'd definately be interested in the B2500's as well, but I've got to do some more checking. If you could email me a price I'd appreciate it.
-Steve |
|
|
| bhg41088 |
| i was checking out the M18WN-19-04's and i cant find specs anywhere, like a response graph. |
|
|
| crackpot |
i have the original datasheet for this driver including freq response, and TS parameters if you are still interested.
I could fax them to you.
crackpot |
|
|
| mtnickel |
I use the M18wn19-04 in my car. It's one of vifa's only mids recommended/designed for car audio (hence the 4 ohms). It's got unbelievably low distortion from what i've read. I translated this article as it was the only review/info/F.R i could find. From what was said, I was sold. I got a couple a while back when on sale at Solen. I can only compare them to my old infinity components, but they blow them out of the water in vocal detail and midbass. Pics are there as well. I would imagine these would work just fine in home audio too. What i've read about that is car audio drivers are usually a lot tough due to the elements they need to survive against. Off axis response is great too. I'd take another set of these if i needed them, but i've got too many speakers as it is!
Looking for some good tweets though (vifa d25ag, seas 27tdfc) |
|
|
| Andypairo |
| quote: | Originally posted by crackpot
hi,
i am clearing out my projects cabinet and have some nice unused VIFA drivers to sell !
2 x D19SD-05-08, shielded 19mm plastic dome tweeters
2 x P21-REX, 8" bass drivers
2 x M22WR-09, 8" bass drivers
2 x M25W-009, 8" bass drivers
2 x P21-RFX/P, 8" midbass drivers
2 x M26WR-XX-04, longthrow 8" bass drivers
2 x M18WN-19-04, 6.5" midbass drivers
also some used VOLT drivers
1 x Ls201, 8" bass driver
1 x M2500.1, 10" midrange driver (marked dustcap)
I don't mind boxing them and sending them internationally since am based in the UK.
any offers ? otherwise will sell on e-bay (have excellent feedback)
crackpot |
How much for a pair of M25 or M26 shipped to Italy?
Do you have specs for these?
Cheers
Andrea |
|
|
| EncinoMan |
Do you still have the M22WR-09, 8" bass drivers?
If so can you give me a price and guestimate on how much to ship to US Pennsylvania 18092. Send me a price on everything you have left please.
It's probably cheaper for me to buy them here but lets see.
Thanks
carlosn@ptd.net |
|
|
|
