| Gofer |
| I think the base of the heatsink is to thin in this case. |
|
|
| Magura |
I guess those heatsinks can, just like 99% of the rest of the heatsinks on the market, benefit from a copper heat spreader. A nice 50 * 12 or 15mm busbar would do wonders for the component working temp.
This is though the usual (pretty trivial) post thats gonna be followed by somebody saying "ooohh yes, what a great idea"
To be followed by a post from somebody who have checked how much such a busbar is, saying "the benefit dosnt justify the cost, I will live with the less than optimal construction of a mosfet in the middle of the heatsink"
This is not to sound grumpy, just to save you guys some time and effort :)
Magura:) |
|
|
| Rixsta |
Ok Cheers I wil bear this in mind if i become rich one day.. he he
But it's still a great idea and funily enogth someone who isn't a amp builder has basic understanding of electronics and who is in the field of computers surprised me today when he said put a copper strip on the heatsink.. lol |
|
|
| Rixsta |
| quote: | Originally posted by Gofer
I think the base of the heatsink is to thin in this case. |
it looks ok to me but then agan iv'e not much experiance in all things electrical.. although iv'e mucked around with it scince the age of 8.
the picture isn't very bright
Did you check the side veiw picture of the sink ? |
|
|
| Magura |
Its used in many other applications, he may have seen is among the overclockers or the like.
The idea is great... nothing less, but usually it turns out that you will only use such an approach for smaller applications because of the cost. The heaatspreader approach is too expensive for anything as big as an amp. Ive made a few tests with this approach for very big heatsinks like the ones in question, and the performance is second to none with the adequate amount of copper attached. But to really make it kick ***, you need to cover most of the base with a copper plate at least 15% the thickness of the lenght of the heatsink....a pricy game :(
Magura:) |
|
|
| Rixsta |
Oooooo Cool Stuff
My freind likes to overclock so you got it right there.
| quote: | Originally posted by Magura
The heaatspreader approach is too expensive for anything as big as an amp.
Magura:) |
Let alone a class a amp with massively massive sinks.......lol |
|
|
| Magura |
| quote: | Originally posted by Rixsta
Let alone a class a amp with massively massive sinks.......lol |
The reason for making those tests was to determine the relation between thickness of copper bar and how far the heat would travel quick enough to make any difference in the end....so that I can implement it in my amp project.
Gonna mount mosfets on 80*120*12mm bus bars.
Magura:) |
|
|
| Matttcattt |
How good to these heatsinks look?
I am sortof looking for some with these dimentions, and £20 for a two foot length looks cool.
I dont know how this price compares to other stuff i would be able to get in the UK, but looking at most companies they have a minimum order of like 50 and I only need 2 or 4. :(
[edit]: He wont ship to the UK. :( damn. |
|
|
|
