Audio Project Amplifier Speaker Loudspeaker Kit
diyAudio.com diyAudio Forums Archive > Top > Other Stuff > Introductions
 
Hello From Sunny Connecticut (not) - Click HERE for Original Thread
mpm32
Hi, just registered and I am a diy anything fanatic. If it's out there, I try to build it. Or, at least research building it so I know how it works. I am interested in trying to build speakers and came across this great forum.

The decision to build came from wanting to build a center channel that would fit into a space in my tv cab. I can't find a good one prebuilt so, I thought I'd try to build one. The space I have is 5" high, 32" wide and 25" deep.

I was going to try to build a front ported MMTMM with a box vol of 1 cubic foot that will fit the space using 4 tangband W4656s sheilded full ranges with a tang band 28-847sa dome tweeter.

I have no idea if this will work or not but I'm going to give it a try. Still need to research how to build the 2-way crossover, never have done one before.

I've built some 2x15" bass reflex monsters when I was in a band but, those did not require crossovers.

Anyway, this site is great.
dhaen
Hi, welcome to the madhouse ;)

I am not a speaker expert, but I do have some knowledge of CRT's. Just be careful of choosing a driver with low magnetic field leakage.

Enjoy..

Page generated in 0.016280889511108 seconds with 16 queries,
spending 0.00704718 doing MySQL queries and 0.00923371 doing PHP things.

Powered by: Search Engine Indexer and vBulletin
Copyright ©1999-2009 diyAudio.com

Please support our sponsor.