| mdlover |
Hi all,
I have some custom made tray loading gear for Philips (and Marantz) CD players using CD-M4 and CD-M9 mechanism.
It is molded by ABS plastic and will not break like the original gear.
Send private mail if you are interested.
Pic.
the left is for CD-M9 and right for CD-M4 |
|
|
| mdlover |
another pic:
the left is the original brittle gear, right is the new gear |
|
|
| jean-paul |
| Hello MDlover, what do they cost ? |
|
|
| mdlover |
Hi Jean-Paul,
Please mail me for details. :)
cheers |
|
|
| tbklbl |
Hi mdlover, I try to email u, but haven't hear from you
I like to get some of this. Can u pls email me the price.
Thanks
tbklbl@hotmail.com |
|
|
| mdlover |
hi tbklbl,
pls check mail. :)
cheers |
|
|
| EngelholmAudio |
I just mailed you - awaiting answer! ;)
I have an old Rotel cd-player with a broken gearwheel. A shame on such nive cdplayer... |
|
|
| tubenut |
| It may be worth doing a search for CDM9 gear and arcam. There is a post that mentions the Philips part number for the gear. I got some through my local Philips agent 2 months ago ex Philips Holland at about 3 Euro a piece..... |
|
|
| tubenut |
PS: They appear to come in and out of stock in Holland, perjhaps they do batches. The plastic on the new gears I have been getting is definately a different grade to the ones I replaced.
What player do you have?
975 and 970 definately use cdm9, 855/65 945/55/65 uses CDM4.
CDM4 does not strip gears often.... |
|
|
| oldphrt |
Hi Mdlover
I'm intersted in buying 2 gears for 2 philips CD850mk2
Can you email me on oldphrt@aol.com with a price? Cheers. |
|
|
| mdlover |
| quote: | Originally posted by oldphrt
Hi Mdlover
I'm intersted in buying 2 gears for 2 philips CD850mk2
Can you email me on oldphrt@aol.com with a price? Cheers. |
hi,
you've got mail.
:) |
|
|
| g'wyn |
Thank you, Thomas, for your replacement drive wheels for the drawer on my Theta Pro Basic CD Transport, which had stopped dead the other week. I opened the case to find only a few teeth left on the drive wheel.
The teeth had been stripped off because the soft plastic gears had broken down from steady use & the case's interior heat.
Called Theta Technical: No parts left, I was told, without further help, leaving me with a $1,500 lump.
Nothing motivates me faster than to be told that something can't be fixed.
Off to the internet I went. Searching for "theta" led m to dyiaudio.com, then a message from Thomas in HongKong. Was I lucky!
Thomas has some replacement wheels he had made with tougher plastic, and would send me two by airmail to US for $25. I sent him the money thru Paypal and guess what?
The wheels arrived yesterday! Thanks Thomas. Thanks dyiaudio.com.
My Theta lump will be back in business as soon as I can mount the new wheel on the drive spindle.
--g'wyn
:cool: |
|
|
| g'wyn |
Thomas:
Got up the courage today to install the replacement Theta drive wheel I got from Thomas in HongKong thru diyaudio.com.
With a magnifier lamp, working almost almost like a jeweler, I used an X-acto hobby knife with new sharp blade to clear the plastic debris from the broken gears from the top of the spindle shaft, gently, gently. then eased the damaged wheel off.
Cleaned spindle shaft with silicon lubricant, attached Thomas’s replacement wheel and it snapped on with a click!
I am so grateful to Thomas in HK -– especially after Theta said nothing could be done. Indeed!
Cheers Thomas!
--g’wyn
:) |
|
|
| tube-lover |
Hi g'wyn,
very thanks for your compliment.
I only do my best for diyers.
many of my friends in hong kon used old Marantz & P.S audio transport. They need gear, so I found to them to repair. also Benefit to most diyers I was very happy to do that.
cheers
thx
thomas |
|
|
| francoisguimont |
Hello Thomas,
Would you by any chance still have one of those CDM-9 gears? I am desperately out of music and I can't reach you by email.
Thanks
Francois
francoisguimont@hotmail.com |
|
|
| tube-lover |
Hi,
sorry i was not in hong kong. I back already. yes, I still had stock of M4& M9 gear.
pls let me know who still had interest.
Anyone can told me the plastic string of the M4 & M9! How long of them. I hope to provide full set to less the postage of the buyers.
Pls let me know the detail.
I had one supply of the CD mechanism plastic string supply that offer USD 3 per one only.
Ths price I will not earn any money & hope diyers can save some money. I will be same resell in same USD3.
thx
thomas |
|
|
| vejanka |
Hi Thomas
Jean Paul told me to contact you regardly tray gear for Philips CDM-9/65. It seems like you are the only person that can solve this problem. I saw a lot of requests from other members and hope I can join the club. If you are willing to help, my mail is zoranmergl@yahoo.com so I'm waiting to arrange a deal.
Regards, Zoran |
|
|
| gbadal |
Hello Thomas:
If you still have a supply of the tray gear / pulleys for a
Marantz CD-72 please contact me. Thanks
G.Badal@att.net |
|
|
| mrbuc |
Hello Thomas:
If you still have a supply of the tray gear for a
Marantz CD-72 please contact me. Thanks
mrbuc@hotmail.com |
|
|
| tombci |
Hi Thomas,
is there any chance you still have a tray gear for a Marantz CD52? Please mail me on tombcix@hotmail.com
Many thanks,
Tom |
|
|
| toolkit |
Hi,
I too am losing teeth from my CD52's eject gear. Let me know if these are still available from yourself.
Cheers
Chris
splitbus * gmail.com |
|
|
| Mike1968 |
Same here. I can tell you that the Marantz CD52 uses a CDM-4 chassis and associated tray gear. The CDM-9 gear is not compatible.
Philips no longer supply CDM-4 parts, but the CDM-9 gear wheel is available for those who need one. Part no. 33192. www.chsinteractive.co.uk.
Has anybody come across a CDM-4 gear wheel? Picture attached.
Cheers,
Mike |
|
|
| dr_jonathon |
| I too need a gear for my Marantz CD 52 mk2.....help!!!!!! |
|
|
| Bricolo |
| quote: | Originally posted by Mike1968
Same here. I can tell you that the Marantz CD52 uses a CDM-4 chassis and associated tray gear. The CDM-9 gear is not compatible.
Philips no longer supply CDM-4 parts, but the CDM-9 gear wheel is available for those who need one. Part no. 33192. www.chsinteractive.co.uk.
Has anybody come across a CDM-4 gear wheel? Picture attached.
Cheers,
Mike |
here?
http://www.chsinteractive.co.uk/ele...tray-phili.html |
|
|
| hotsix |
I cant email u on DIYAUDIO as I am new...my ady is dkloepping@bellsouth.net if u can email me there with price.
David |
|
|
| gbadal |
Gentlemen/Ladies :
As I review the various posts to the threads concerning obvious
manufacturing/design flaws in the tray gears of CDM-4 and
CDM-9 players it really irritates me that no single response
has ever been received from anyone associated with Marantz
or Phillips. The answer to our requests for this cheap plastic
part is that it no longer is in stock or available. You would think that with the numerous posts requesting help in trying to find a source for these gears that someone/anyone from these
companies would have the decency to suggest a path to repairing
these units which many of us have upgraded and do not wish to
trash just because these firms have abdicated their responsibilities to provide for their customers. When we parted with our money to buy these units the least we could/should
expect is that with the knowledge these firms had with the
failure rate of these gears that a source of replacements would
be made available. My Marantz CD-72 has been defective since the mid 90's and it only survives because a local repair shop
cobbled together a fix for the gear. Saul Marantz is turning in
his grave as he observes this forum. D & M Holdings, you should be ashamed. |
|
|
| Netlist |
But of course it is still available.
I'll check with my supplier on Monday for quantities.
http://www.diyaudio.com/forums/show...4075#post164075
The offer still stands, were it not that I'm not prepared to distribute the gear to all parts of the world.
I won't do a group buy either.
If enough gears are available, I might ship some to someone willing to do the distribution for all of us.
I'll keep you posted.
/Hugo |
|
|
| Mike1968 |
Hi Hugo,
I know the CDM-9 gear wheel is readily available (as per my post above). However, is the CDM-4 gear actually available? (For the Marantz CD 52). I am informed by Charles Hyde & Son in the UK that Philips have discontinued the CDM-4 gear?
Many thanks,
Mike |
|
|
| Netlist |
If someone could supply a Philips # like 4822-xxx-xxxxx or position # from the schematic I might be able to find out.
/Hugo |
|
|
| hotsix |
How do I get one?? How much in USD?
David |
|
|
| Mike1968 |
David,
Full details of obtaining CDM-9 tray gear wheels via Charles Hyde and Son in the UK (they send items internationally) are on my post above. Simply use your US credit card to buy.
Hugo has very kindly offerred to try and locate a CDM-4 gear wheel supplier if someone can advise him the part number from a CDM-4 schematic (which I don't have).
Mike |
|
|
| Bricolo |
that's what I found by searching the forum
4822 528 81329
4822 358 10115 |
|
|
| Netlist |
4822 528 81329 is wheel #152 on the drawing.
If that is the gear you look for, it is unobtainable by me.
4822 358 10115 is the belt #141, also unobtainable.
The thread starter might still have some stock, we need to get his attention.
-=Hugo=- |
|
|
| hotsix |
This is for Thomas aka "tube-lover" I would like to get one drawer gear please. My addy is dkloepping@bellsouth.net as I cannot email you yet on here as I am "not worthy yet" lol Thnx
David |
|
|
| mdlover |
Hi all,
Please note that I'm not Thomas and I'm not offering these gears now.
Thank you for your attention. :)
Cheers |
|
|
| Sandor |
Does anyone know where I can find the following CDM-4/19 spare parts:
1) part number 300 40005: it is the pivot plate identified by number 52 in the disassembly diagram in the Rotel 855 service manual.
2) part number 013 40001: the small ball near the centering ring, identified by number 1 in the disassembly diagram
Those parts can also be used and picked from a broken unit.
Thank you.
Best regards.
Paul |
|
|
| marsattack |
hi folks
i have found the tray gear for marantz cd-72 in ebay ,free shipping.great news.the seller also has the tray gear for cdm-9.
Item number: 160082024331 anyone who want to repair their cd-player can go to have a look |
|
|
| Ghianni |
Hi all,
For your info. That's the same tray gear (part No. 4822 528 81329) for the Philips CD850 and CD850MKII. I need also one.... |
|
|
| Bricolo |
| quote: | Originally posted by marsattack
hi folks
i have found the tray gear for marantz cd-72 in ebay ,free shipping.great news.the seller also has the tray gear for cdm-9.
Item number: 160082024331 anyone who want to repair their cd-player can go to have a look |
Hi,
where on ebay? |
|
|
| Ralphies |
Hi mdlover,
can you send me an email to: zundappies@hotmail.com
for the price of a cd-traywheel philips850?
My account is still to under construction to mail you.
Greetings Ralphies from the Netherlands. |
|
|
| jonclancy |
Just been on the phone to Dutchwest in the UK. +44 1434 323232
For those who want CDM9 wheels, the are still available at £1.95 each plus VAT and postage.
As Hugo said earlier:
4822 528 81329 is wheel #152 on the drawing.
If that is the gear you look for, it is unobtainable by me.
4822 358 10115 is the belt #141, also unobtainable.
These are also showing as no longer available. The CDM9 wheels will come from main stores in Holland. Sorry, but I can't shed any light on the CD850 question.
Hope this helps a little.... :)
Jon |
|
|
| mrmotor |
I'm trying to contact this person to obtain a gear for CDM9 but the site states I haven't posted enough to do so. Well I'm trying !please anyone contact me if you have one of these !!!!
Thanks
Keith |
|
|
| mrmotor |
Jon,
Thanks for the quick reply. I've just placed my order for 2 of these always good to have a back up.
Again Thanx so much.
Keith |
|
|
| Ralphies |
Thanx!!
This is a good option, thanx for this site!!!
Greeting Ralphies. |
|
|
| gianrico |
| I don't understand how to change the gear . The Gear is linked to the support without a screw |
|
|
| jonclancy |
Hi, If I recall correctly, the geared wheel just snaps off.
Don't forget to use non aggressive silicone grease when you reassemble.
HTH
Jon |
|
|
| macroaudio |
| quote: | Originally posted by mdlover
another pic:
the left is the original brittle gear, right is the new gear |
I also have a broken gear in my Theta Data Basic which uses the CDM9 Pro unit. Are there any replacements available for purchase? I am new to DIY and cannot yet e-mail, so my response to you may be delayed. |
|
|
| jonclancy |
Hi Rick,
I don't know about the CDM 9 Pro, but if you give Dutchwest a call (see post #43), they might be able to help.
Cheers
Jon |
|
|
| mcmorj |
Hi MDLover,
I wonder if you have any spare gear wheels left for a cdm9 transport. If you could mail me (as I am unable to mail you being a newbie) I would be grateful.
mcmorj@gmail.com
Joe:D |
|
|
| mdlover |
hi Joe,
You've got mail. :D
cheers |
|
|
| coomalieaudio |
| G'day from Australia,I too am looking for a replacement tray gear wheel,for my Marantz CD52,with CDM4 transport.Interested in a bulk buy as well,since I know a few people with similiar units.Have Paypal access.I'm glad I found you!Andrew Percival |
|
|
| trowie |
Hi
I have just taken an Arcam Aplha 5 to bits, because the tray does not move. No surprise, I need a replacement CD 90 wheel. I am finding it difficult to source.
Being an imporviser I have made a temporary repair using a piece of wesuit material applied like a washer onto the broken spindle. This works because it sponges into the teeth on the tray and has enough friction to do the job. I am happy with this for a week or so but would prefer to have the part. Please email me if you can supply.
Cheers
Trowie |
|
|
| johnandchris |
Hi. I recently bought a cdm-9 gear thinking it would fix my rotel rcd-950. Alas, different transport. I paid £18 incl p&p, but you can have it for £15 incl postage. It also comes with a new belt.
Give me a ring on 01373826587 if you want it. Otherwise, its ebay here we come.
John |
|
|
| boozemun |
| Thomas or anyone who has a replacement gear for the Theta Basic Transport please email me at boozemun@yahoo.com. This site won't let me send email to users yet. Thanks. |
|
|
| boozemun |
| Can you or anyone who has a drive gear for the CDM 9 (I think) for a Theta Basic Transport please email me at boozemun@yahoo.com with the info. Much appreciated. |
|
|
| pmonti |
Please some body can tellme the diferences between CDM4, CDM4/19 and CDM-425?
Thanks and best Regards!!!! |
|
|
| Kardig |
Hi there!
I've read your topic on gears for cd players. I have an ROTEL-RCD970BX Cd player with a CDM-9 mechanism and its loading gear justed broked. Do you still have some? I would be interested.
Gabor (Hungary)
gabor.kardos@chello.hu |
|
|
| ncoligan |
| I need to get a Philips CDM-9 CDM9 PRO Gear... at least I believe that's the one... for my Arcam 5 Plus. Is anybody still stocking these? |
|
|
| PALUSE |
Hi Netlist
I have the same problem with my Philips CD-850II!
The gear blew apart, so i'm asking you if you still have the gear, how much it will cost plus delivery to Portugal, Lisbon.
Its a CDM-4 mech, and the part number is 4822 528 81329!
Best regards
Paluse :smash: |
|
|
|
